Where to Find Monitor Calibration Settings and ICC Profiles on TFTCentral

Updated

TFTCentral hosts a dedicated ICC Profiles and Monitor Calibration Settings Database under its Resources section, alongside Best Settings Guides under Guides. These are the two main places to look for calibration data and per-monitor setup recommendations. The database is the starting point if you want an ICC profile for a specific model; the guides are the starting point if you want step-by-step adjustment instructions, including brand-specific walkthroughs such as the Asus DisplayWidget Center guide.

The two resource areas

Resource What it provides Where it sits on the site
ICC Profiles and Monitor Calibration Settings Database ICC profiles and calibration settings tied to specific monitors Resources
Best Settings Guides Recommended settings and adjustment walkthroughs, including brand-specific guides Guides

Both are listed in the site's main navigation, so you can reach them without going through reviews or news posts.

ICC Profiles and Monitor Calibration Settings Database

This is the resource to use when you already know your monitor model and want a profile or settings file to apply. It is presented as a database, meaning entries are organised by monitor rather than by article date.

Practical points to keep in mind:

  • An ICC profile is only meaningful for the specific panel and firmware it was created on. Two units of the same model can differ, so a downloaded profile is a starting point, not a guaranteed match.
  • Profiles are usually paired with brightness, contrast, and colour-mode settings. Applying the profile without matching those settings can make the result worse than the default.
  • If your exact model is not listed, check closely related variants before assuming nothing exists — but treat a variant's profile as approximate.

Best Settings Guides

The Guides section covers recommended settings rather than raw profile files. TFTCentral's own example is the "Easy Asus Monitor Adjustment, and Download Our Best Settings – DisplayWidget Center Guide", which combines adjustment instructions with downloadable settings.

That guide illustrates the general pattern you can expect from this section:

  1. Install or open the vendor's monitor control software (in that case, Asus DisplayWidget Center).
  2. Follow the guide's adjustment sequence for brightness, colour, and mode.
  3. Download and apply the provided best-settings file.

The expected result is a monitor configured to the site's tested recommendations without manually working through every OSD option.

How to choose between them

  • You want a file to load: go to the ICC Profiles and Monitor Calibration Settings Database.
  • You want to know which settings to change and why: go to the Best Settings Guides.
  • You want both: start with the guide for your brand or model, then check the database for a matching profile.

Common snags

  • Model naming varies by region. A monitor sold under one name in one market may appear under another in the database.
  • Firmware revisions change results. A profile made on an earlier firmware may not hold after an update.
  • Software dependency. Brand-specific guides assume the vendor's control software is available and installed; without it, you fall back to the monitor's own OSD.
  • No profile is not a dead end. If nothing matches, the Best Settings Guides still give you a manual path.

Beyond these two areas, TFTCentral also publishes monitor reviews, articles, videos, and news, plus a Monitor Panel Part Database and a Monitor Launch Tracker under Resources. If your goal is calibration specifically, the ICC database and the Best Settings Guides are the sections to use.