Hans Summers Radio, Electronics and Computing Projects: What to Build and Where to Start
Updated
HansSummers.com is a personal project archive by Hans Summers (G0UPL) covering radio, electronics, and computing builds, ranging from simple crystal radios to a full Z80 computer. It suits hobbyists who want a documented, buildable project and are comfortable reading schematics and sourcing their own parts. The site is organised as a long index of project pages rather than a course, so the practical approach is to pick a category first, then choose a project that matches your tools and experience.
What the collection actually contains
The site groups projects under broad headings, with individual pages for each build. The main clusters are:
- QRP/QRSS and beacon kits — QRP Labs, the Ultimate 3S QRSS/WSPR kit, 30m QRSS beacon variants, 30m QRSS Si570 beacon, 30m QRSS receiver, 40m low power QRSS tx, Tropical and Mediterranean QRSS, and a keyer chip.
- Receivers and transmitters — CW transmitter, Unichip 80m transceiver, 40/80m CW/SSB receiver, 30m receiver, Fredbox 2m AM transceiver, crystal radio, simple radio receiver, transistor and valve shortwave radios, Hellraiser transmitter, and a Weaver method SSB design.
- Clocks — panel-mounting clock, sidereal clock, LED matrix clock, giant Nixie clock, radio controlled clock, binary clock (and binary clock kit), MSF Nixie 'scope clock.
- Test and measurement gear — simple frequency counter, LCD frequency counter, RF frequency counter, BCD frequency counter, spectrum analyser Mk1 and Mk2, simple QRP power meter, QRO dummy load, QRO ATU, antenna tuning unit, and a simple test mixer.
- Computing — the great Z80 project, Z80 computer, the Mandelbrot set, asynchronous TTL CPU, CPCNG notes, and an F-CPU scheduler.
- Supporting material — datasheets, a guest project gallery, and "101 Things".
Because the index is flat and long, the fastest way to navigate is to scan for the category name in the list, then open the individual project page for schematics and notes.
Choosing a first project
The right entry point depends on what you already have on the bench and whether you lean toward radio or computing.
| If you want to… | Reasonable starting points | What you'll need |
|---|---|---|
| Build something with minimal parts | Crystal radio, simple radio receiver, LED clock | Basic hand tools, soldering iron, salvaged or common components |
| Practise measurement and debugging | Simple frequency counter, LCD frequency counter | A counter build plus something to test it against |
| Get on the air with digital modes | Ultimate 3S QRSS/WSPR kit, 30m QRSS beacon | Kit components, an antenna, and a receiver to verify output |
| Work on a larger digital build | Z80 computer, the great Z80 project | Logic ICs, a programmer or ROM approach, patience with wiring |
| Improve station infrastructure | QRP power meter, dummy load, ATU | Enclosure, connectors, and a way to verify calibration |
Two useful patterns in the collection:
- Beginner-friendly builds such as the crystal radio, simple frequency counter, and LED clock are self-contained and don't require specialised RF test equipment to confirm they work.
- Advanced builds such as the Ultimate 3S QRSS/WSPR kit, the spectrum analysers, and the great Z80 project assume you can follow a full schematic, debug in stages, and accept a longer build time.
How to work through a project page
- Read the whole page before buying anything. The pages mix description, schematic, and construction notes, and later sections often contain corrections or alternatives to earlier ones.
- Identify the input, action, and expected result. For a beacon or transmitter, the input is your keyed or programmed signal, the action is the oscillator and amplifier chain, and the expected result is a measurable RF output you can confirm with a receiver or power meter.
- Check the supporting material. Datasheets and related project pages are linked from the index; use them to confirm pinouts and component values rather than guessing.
- Look at the guest project gallery. Other builders' versions show what worked in practice and where they deviated from the original.
Common sticking points
- The index is not a difficulty ranking. Projects are listed by topic, not by how easy they are, so a simple build can sit next to a complex one. Judge difficulty from the schematic and parts count, not the position in the list.
- Some projects assume parts you may not have. QRSS and beacon builds typically need stable oscillators and a way to verify frequency; test gear builds often need a reference to calibrate against.
- Older projects may use obsolete parts. Where a specific IC or crystal is no longer common, expect to substitute and re-check the surrounding circuit.
- Radio and computing builds need different skills. If you're new to RF, start with a receiver or crystal radio before a transmitter; if you're new to digital logic, start with a clock before the Z80.
Where to go next
Use the site index to pick one category, open two or three project pages in that category, and compare their parts lists and schematics. Choose the one whose parts you can actually obtain and whose expected result you can verify with the equipment you already own. The datasheets section and guest gallery are worth checking before you commit, since they often answer the questions a project page leaves open.