How to Mix Multiple Colors with hue.tools

hue.tools is a free browser-based color mixer, blender, info and modifier tool. To mix multiple colors, you add two or more colors to the mixer, adjust how they combine, and read the resulting color from the output area. This works for quick palette experiments, finding a midpoint between brand colors, or generating a base color to build a design around. No account or install is mentioned in the site description, so you can start directly in the browser.

What you need before starting

• A browser and the hue.tools page open.
• Two or more colors you want to combine. These can be hex codes, or colors you pick visually if the tool exposes a picker.
• A rough idea of the result you want: a blend, a midpoint, or a modified version of one color.

Step-by-step: mixing colors

1. Add your first color

Enter or select the starting color. If you have a hex value from a brand guide or a screenshot, paste it in; otherwise pick a color from the interface.

2. Add additional colors

Add each further color to the mix. The tool is described as mixing "multiple colors," so you are not limited to a pair — you can stack several and see how they average out.

3. Adjust the mix

Use the tool's controls to change how the colors combine. Depending on the interface, this means shifting proportions between colors or choosing a different blend behavior. The goal at this stage is to move the result toward the balance you want rather than accepting the first output.

4. Read the result

The mixed color appears as an output value (typically a hex code) plus a visual swatch. Copy that value — it is what you carry into your design work.

5. Verify the result

Check the output against your intent:

• Is it closer to one input than you expected? Shift the proportions.
• Does it look muddy? Reduce the number of colors or move the inputs closer together in hue.
• Does it match a target? Compare the output hex against the target and adjust again.

Using the result in design

Once you have a mixed color, hue.tools also offers related functions described on the site: getting links for design inspiration and stock images based on a color, and viewing various color combinations. That means the mixed color is not a dead end — you can feed it forward into:

• Inspiration and stock images — find visual references that use your color, useful for mood boards or layout direction.
• Color combinations — see palettes built around the result, so you can pick supporting colors instead of guessing.
• Modification — tweak the color further (lightness, saturation, or similar) if the blend is close but not final.

Common sticking points

• Mixing too many colors at once. Every added color pulls the average toward gray. Start with two, then add one at a time.
• Expecting a specific target from an even blend. An even mix of two colors gives the midpoint, which may not be the color you pictured. Adjust proportions rather than adding a third color.
• Losing the original values. Copy your input hex codes before you start adjusting, so you can return to a known state.
• Treating the output as final. The mixed value is a starting point; run it through the combination and modification features before committing it to a design system.

Quick reference

The whole workflow is: add colors, tune the mix, copy the output, then use the tool's inspiration and combination features to place that color in a real design context.