What Coil and Motor Winding Technologies Does Marsilli Offer?

Marsilli provides coil and motor winding systems built on two core coil-winding methods — spindle winding and flyer winding — and adds needle winding for motor stators. The company says its machines scale from a single spindle up to 24 spindles, handle wire sizes from 0.02 to 2.5 mm, and run at speeds up to 25,000 RPM. These figures describe the range Marsilli states for its equipment; a specific machine's actual capability depends on its configuration, so confirm the exact specification for the model you are considering.

Coil winding: spindle and flyer methods

Marsilli groups its coil winding technology into two main categories:

• Spindle winding — the coil is wound on a rotating spindle.
• Flyer winding — a rotating flyer arm lays wire onto the coil.

Both are presented as the foundation of Marsilli's coil experience, and the company positions precision, flexibility, and customization as requirements in this work. The stated machine range for coil winding is 1 to 24 spindles, wire from 0.02 to 2.5 mm, and up to 25,000 RPM.

Motor winding: adding needle winding for stators

For motors, Marsilli says it applies spindle and flyer winding — carried over from its coil experience — plus needle winding on open and closed stators, which it developed specifically for motor winding. In practical terms, the stator type (open or closed) is the first thing to match against the winding method, because needle winding is the method Marsilli names for stator work.

Industries and supporting services

Marsilli lists automotive, appliances, electromechanical applications, RFID, and consumer electronics among the industries it covers. Beyond the winding machines themselves, the site describes services that matter when planning a line:

• Co-engineering — joint development work with the customer.
• Refurbishment and retooling — updating existing equipment.
• Training — operator or technical instruction.
• My.Marsilli platform — a digital platform the company offers alongside its systems.
• Certified pre-owned equipment — a route to used machines with certification.

The company also references certifications including ISO 9001, ISO 14001, ISO 45001, and ISO/IEC 27001, and states more than 80 years of experience in winding and assembly systems.

How to use this when evaluating Marsilli

Start from your part: if you are winding a coil, the choice is between spindle and flyer winding; if you are winding a stator, needle winding on open or closed stators is the relevant method. Then check whether your wire diameter falls inside the stated 0.02–2.5 mm range and whether your output needs fit within 1–24 spindles and up to 25,000 RPM. For anything outside those stated bounds, or for pricing and delivery details (not published on the page reviewed), contact Marsilli directly rather than assuming a standard configuration will cover it.