Where to Confirm UXTU Compatibility or Ask About Your Device

To confirm whether UXTU supports your PC, check the project's compatibility notes and the release notes for the version you plan to install, then match the findings against your own processor. The UXTU website cannot detect your hardware, so the check is manual. If the notes are unclear, ask in the project's Discord community before changing any settings. Do not adjust power limits or temperature targets until support is confirmed.

What the site does and does not tell you

UXTU's compatibility section states that it supports a range of x86 Windows PCs, and that the controls available on a given machine depend on its processor, firmware and manufacturer. The site lists two processor families:

The site explicitly says it cannot check your hardware and directs users to confirm support in the release notes before changing any settings. Treat the table above as a starting filter, not a guarantee — a supported processor family does not mean every control is available on your specific laptop or desktop.

Step 1: Identify your exact processor

You need the precise model, not just the brand. On Windows, open Task Manager and check the Performance or Details tab, or run systeminfo in a command prompt and read the processor line. Note the full model name (for example, a specific Ryzen or Core part number) and whether it is a laptop or desktop system.

Step 2: Read the compatibility notes and release notes

The site links to the project's compatibility notes and to the release notes for the current stable release, v26.3.1 (dated 6 September 2026). Read both:

• Compatibility notes — the project's own statement of which hardware is supported.
• Release notes — what changed in the version you will install, including any support changes.

Match your processor model against these documents. Because the site warns that presets and controls vary by processor and device, also check whether the specific controls you want (power limits, temperature targets, Adaptive Mode) are listed for your hardware.

Step 3: Ask the community if it is still unclear

The site offers a Discord community (listed with 13.8K members) and an "Ask about your device" route from the compatibility section. If your processor is not clearly covered, or you are unsure which controls apply, ask there with your full processor model and device type. Community members can report what works on hardware like yours.

Step 4: Confirm before you change anything

The site repeats one instruction in both the compatibility and app sections: check which controls your hardware supports before making changes. This matters because UXTU adjusts power limits and temperature targets — settings that affect how your PC runs. Confirm support first, then install from the stable release (installer or portable version) and start with a premade preset rather than custom values.

Quick checklist

• [ ] Full processor model identified via Task Manager or systeminfo
• [ ] Processor family checked against the AMD Ryzen / Intel Core 4th-gen-or-newer table
• [ ] Compatibility notes read for your specific model
• [ ] Release notes for v26.3.1 reviewed
• [ ] Discord consulted if anything is ambiguous
• [ ] Settings left unchanged until support is confirmed

If your processor falls outside both listed families, the site's own framing suggests UXTU is not aimed at your hardware; confirm in the compatibility notes rather than assuming partial support.