简体中文
English
Website review
This review may include AI-generated content and is not individually verified. Domain, certificate and other facts come from the observed data on this page.
What is Genie Scientific?
Genie Scientific is a U.S. manufacturer and installer of laboratory fume hoods and lab furniture, operating since 1979. Its distinguishing feature is that design, manufacturing, delivery and installation are handled under one roof, so the same company can plan a lab, build custom or standard furniture, and install it nationwide — whether the job is a single fume hood or a full facility build-out.
Who it suits
- Facilities and lab managers who want one accountable vendor from layout through installation rather than coordinating separate designers, fabricators and installers.
- Architects and contractors who need a manufacturer that will work directly with them on space planning and custom requirements.
- Buyers with unusual requirements — the company emphasizes custom chemical fume hoods and custom furniture built to fit a specific lab, not just catalog items.
Trade-offs to weigh
Single-source design-build can simplify scheduling and responsibility, but it also concentrates risk: you are relying on one firm's capacity and lead times for everything. It is worth confirming how much of the work is genuinely in-house versus subcontracted, and getting the installation timeline in writing. If your priority is the lowest price on standard, off-the-shelf casework, a pure dealer model may be more competitive; if your priority is a tailored lab with fewer handoffs, the integrated approach is the stronger fit.
Practical next step
The site's own suggested starting point is a phone call, and it also invites you to upload a drawing — or to have Genie design the lab if you don't have one. Before that call, prepare a room plan or rough dimensions, a list of chemicals and airflow needs for any hoods, and your target occupancy date. Those three items let a planner tell you quickly whether your project fits their custom-build process or a standard package. You can review the offering directly at Genie Scientific.
How do I request a free consultation or quote for a fume hood or lab furniture project?
Call Genie Scientific directly at 1-800-545-8816 to request a free consultation; the site says someone answers the phone. Alternatively, use the "Upload a drawing and Get Started" option, and if you don't have a drawing, the company says it can design your lab. Its consultation scheduler is presented as free, and the same path covers both a single fume hood purchase and a full facility build-out.
What to prepare before you call
A short brief speeds up the conversation and gets you a more accurate quote:
- Scope: one fume hood, a furniture package, or a full lab build-out.
- Drawings or dimensions: a floor plan if you have one; room size and layout if not.
- Site details: location, whether installation is needed, and access constraints for delivery.
- Timeline: when the lab must be operational, and any phased occupancy.
- Chemical use: the substances handled, which affects hood selection and safety requirements.
Which route fits your situation
| Your situation | Best first step |
|---|---|
| You have drawings and a defined scope | Upload the drawing through the site's Get Started option and request a quote |
| You have a space but no design | Call to request the free consultation and lab design help |
| You need one standard hood | Call with the model or your requirements for a quick quote |
| You are an architect, facilities manager or contractor | Call to involve their planning specialists early |
Genie describes design, manufacturing and installation as handled under one roof, and it works with architects, lab and facilities managers, and contractors during planning. If your project involves regulated or high-hazard work, confirm with the company and your safety officer that the proposed hood and installation meet your compliance requirements before signing off.
Can Genie Scientific design a custom laboratory layout if I don't already have drawings?
Yes. Genie Scientific states that if you don't have a drawing, it can design your new lab, and it describes its lab planning specialists as producing a space plan for current output and future growth. The same page says design, manufacturing and installation are handled "all under one roof," so a layout can move from planning into custom fabrication and installation without a separate vendor.
What that means in practice
- Starting point: You can come with requirements rather than blueprints—room dimensions, the work your lab does, equipment, ventilation needs and expected headcount.
- Who it's built for: The company says its planning work involves architects, lab and facilities managers, and contractors, which suits renovation or new-build projects where several parties must agree on a layout.
- Scope: It presents itself as able to serve both a large facility build-out and a single fume hood purchase, so the design conversation can scale to the project.
A sensible next step
Gather a short brief before contacting them: floor area and ceiling height, the fume hoods and benches you expect, chemical storage and airflow constraints, and how the space might expand. That turns a design request into a concrete plan. If you already have drawings, the site invites you to upload them; if not, ask for a planning consultation first.
For comparison, established lab-planning firms such as Lab Builders also work from user requirements, which is useful if you want competing layout proposals before committing to one manufacturer.
What is the process for ordering and installing fume hoods or lab furniture nationwide?
Genie Scientific's stated process runs in three stages under one roof: planning, manufacturing, and installation. The company says its lab planning specialists work with architects, lab and facilities managers, and contractors to produce a space plan; it then builds standard or custom fume hoods and furniture; and its own installers handle receiving, staging, and installation. The site describes serving both large facility build-outs and single fume hood purchases, with shipping and installation nationwide.
How to start an order
The site presents two entry points. You can call the listed phone number, or upload a drawing through the site to get started. If you don't have a drawing, the company says it can design the lab for you, and it offers a free consultation booking.
A practical sequence for a nationwide project
- Define the scope and site. Confirm whether you need a single hood, a furniture package, or a full lab fit-out, and identify who will receive and stage deliveries at the destination.
- Submit drawings or request design help. Send existing architectural or lab drawings if you have them; otherwise ask for planning support early, since hood placement, ducting, and bench layout decisions constrain each other.
- Confirm the specification in writing. For fume hoods, agree on the model, dimensions, electrical and ducting requirements, and any custom fabrication before manufacturing begins.
- Plan delivery and installation logistics. Nationwide installation depends on site readiness: clear access, a staging area, and coordination with other trades. Ask who supervises installation and how site conditions are verified before the crew arrives.
- Schedule installation and sign-off. Confirm the installation window against construction milestones, and agree on what commissioning and handover include.
Choosing between the two paths
| Situation | Sensible approach |
|---|---|
| You have drawings and a defined spec | Upload drawings and request a quote for manufacture and installation |
| You need layout help or a new lab design | Start with planning and a consultation before specifying products |
| Single hood replacement | Call directly to confirm model, lead time, and installation needs |
| Multi-trade construction project | Involve the planner early alongside the architect and contractor |
For comparison while specifying, established laboratory furniture and fume hood makers include Labconco and Waldner. The main trade-off with a single design-build-install supplier is accountability versus flexibility: one contract and one point of contact simplify coordination, but you should still verify lead times, installation responsibilities, and warranty terms in the quote rather than assuming them from the website.
How does Genie Scientific handle custom manufacturing versus standard lab furniture products?
Genie Scientific presents both custom and standard options as part of one in-house process: design, manufacturing, delivery and installation are handled under one roof. The distinction is less about two separate product lines and more about how much of the design work is tailored to the lab. The site describes custom chemical fume hoods and custom furniture built to fit a lab's look, style and specific requirements, while also stating that the company installs both custom and standard fume hoods and lab furniture. For standard products, the site points readers to online catalogs; for custom work, it invites a consultation or an uploaded drawing, and notes it can design the lab if no drawing exists.
What that means in practice
- Custom path: A facilities manager renovating a constrained lab with unusual bench depths, sink placements or hood clearances would start with a drawing or a consultation. Genie's planning specialists work with architects, facilities managers and contractors on space plans, then manufacturing builds to those requirements before installation.
- Standard path: A buyer who needs a single fume hood or a straightforward furniture package can use the catalogs and order without a custom design phase. The site explicitly says it serves both a multi-million-dollar facility build-out and a single hood purchase, with nationwide shipping and installation.
- Scale doesn't determine the path. The dividing line is whether the lab's requirements fit standard products or need custom fabrication, not the size of the order.
Choosing between them
Use standard products when dimensions, utilities and layout match catalog options and speed matters. Choose custom when the space plan, safety requirements or aesthetic fit can't be met off the shelf, and expect the design and manufacturing stages to add time. Because design, fabrication and installation sit with one company, the handoff between a custom drawing and the installed hood is simpler than coordinating separate vendors, though it also means less flexibility to mix in third-party products.
A useful first step is to call the number listed on the site or upload a drawing through its Get Started option; the site says it answers calls directly. If you already have a drawing, that conversation can quickly establish whether your needs fall into standard catalog territory or require custom manufacturing.
For comparison, other laboratory furniture and fume hood suppliers include Labconco and Hamilton Laboratory Solutions.
What should facilities managers or architects prepare before contacting Genie Scientific about a lab build-out?
Prepare four things: a floor plan or sketch of the space, a clear scope of what is being built or replaced, the safety and compliance requirements, and a realistic budget and schedule. Genie Scientific's page says you can upload a drawing to get started, and that they can design the lab if you don't have one, so a rough layout is enough to open the conversation.
What to bring to the first call
- Space information: room dimensions, ceiling height, door and corridor widths, and any structural or service constraints. These affect whether standard or custom fume hoods and furniture will fit.
- Scope and quantities: number of fume hoods (standard or custom chemical), benches, casework and storage, plus whether this is a new build, renovation or single-unit purchase. The site explicitly serves both multi-million-dollar facility build-outs and single fume hood orders.
- Safety and compliance needs: the chemicals and processes used, required airflow and containment, and any local code or institutional review requirements. Genie positions its hoods as "designed for safety," but the specific performance criteria must come from your own risk assessment.
- Site and scheduling details: delivery access, staging space, installation timing and who else is on site. Genie's process page stresses that receiving, staging and installing furniture is critical, so plan for it early.
- Decision-makers and budget range: who signs off, and what funding is approved. Avoid anchoring on a number before the scope is defined.
Who should be on the call
Architects typically bring drawings, code context and coordination questions about other trades. Facilities managers usually bring equipment inventories, service histories, utility capacities and outage windows. If both are involved, agree on one point of contact and one scope document before contacting Genie, since their process spans planning, manufacturing and installation under one roof.
A practical next step
Write a one-page brief: room plan, item list with quantities, chemical and airflow requirements, target dates and budget band. Then call the number listed on the site or upload the drawing as the page suggests. Ask specifically how custom versus standard hoods are decided, who handles site measurement, and what installation responsibilities fall to you versus their installers. For background on lab design standards, ASHRAE publishes ventilation guidance, and AIHA covers industrial hygiene practice.
Cloudflare
Microsoft 365
User reviews (0)