简体中文
English
Website review
This review may include AI-generated content and is not individually verified. Domain, certificate and other facts come from the observed data on this page.
What is Baughman Tile Co.?
Baughman Tile Co. is a manufacturer of corrugated HDPE (high-density polyethylene) pipe and fittings, based in Paulding, Ohio. The company describes more than 130 years of history across five family generations and positions itself as a supplier to drainage, sewer, agricultural and construction customers rather than a general building-materials retailer.
What it makes
- Single-wall, dual-wall and triple-wall corrugated pipe, with triple-wall products aimed at sewer and drainage work.
- Specialty lines such as PolyCap® fence cap and PolyVac® vacuum tubing.
- Fittings and accessories to complete pipe runs.
What it offers beyond the product
The site is built around project support as much as catalog browsing. Engineering resources include CAD drawings, downloadable pipe specifications by diameter, notes on applicable standards and state DOT approvals, plus drainage planning tools such as a drainage calculator, tile spacing and coil footage calculators, and a HydroCAD wizard. Installation guidance references ASTM D2321, the standard practice for underground installation of thermoplastic gravity-flow pipe.
Delivery is handled with the company's own fleet, which the site says numbers 55 trucks and trailers, with hydraulic gates and lift beds for unloading without customer assistance and lighter flatbeds intended to reduce soil compaction on agricultural deliveries.
Who it suits
A contractor sizing a field drainage system, a farmer planning tile installation, or a specifier who needs pipe dimensions and DOT approval status will find the technical downloads and calculators the most useful starting point. A homeowner looking for small quantities of decorative pipe is less clearly served; the site reads as a manufacturer working with trade and project buyers.
Next step: if you have a specific project, open the CAD drawings and pipe specifications for the diameter you need, then use the estimate request form to confirm availability and delivery to your location.
Which corrugated HDPE pipe type should I choose for a drainage or sewer project?
Choose by the load and cover depth the pipe must carry, then by how much you value flexibility on site. For most residential drainage and light commercial work, single-wall pipe is the economical default; step up to dual-wall when the pipe sits under a driveway, road or deep fill; reserve triple-wall for sewer and heavy-load applications. Baughman Tile Co makes all three families plus fittings, and its site pairs each product page with CAD drawings and pipe specification files so you can match dimensions to your plan before ordering. Baughman Tile Co
Matching pipe type to the job
| Pipe type | Typical use | Main trade-off |
|---|---|---|
| Single-wall | Yard drains, downspout runs, agricultural field drainage, shallow bury | Lowest cost and lightest, but least resistance to crushing under heavy loads |
| Dual-wall | Driveway and lane crossings, deeper cover, mixed drainage where strength matters | Stronger ring stiffness for moderate cost; slightly heavier and stiffer to handle |
| Triple-wall | Sewer and drain lines, road crossings, deep-buried gravity flow | Highest load capacity; highest cost and least forgiving of poor bedding |
Practical decision criteria
- Cover depth and traffic: shallow, non-trafficked runs favor single-wall; anything under vehicles or more than a couple of feet of fill points to dual-wall or triple-wall.
- Flow requirement: size the diameter from the drainage area and slope first, then pick the wall type—wall choice affects strength, not capacity.
- Installation method: all Baughman pipe is specified for installation per ASTM D2321, so bedding and backfill quality matter as much as the pipe class. Baughman Tile Co
As a next step, pull the diameter-specific specification file and CAD detail for your shortlisted sizes from the site's technical library, and use the drainage calculator and tile-spacing tools to confirm diameter and layout before you request an estimate. For sewer work, check state DOT approvals listed on the site, since some agencies restrict which wall profiles are accepted.
How do I size a load and request an estimate for delivery to my site?
Baughman Tile's site points you to two separate steps: size the load first, then request an estimate. The pages for "Load Sizing" and "Request an Estimate" sit under Customer Support, and the delivery page describes a fleet of 55 trucks and trailers with hydraulic gates and lift beds so drivers can unload without help from the customer. The company also notes its flatbed fleet is lightweight to reduce soil compaction, which matters for agricultural buyers.
Sizing the load
- Use the site's drainage and pipe tools to work out quantities before you call: the BTC Drainage Calculator, the Tile Spacing tool and the Coil Footage tool, plus the HydroCAD Wizard for stormwater modeling.
- Match the product to the job: single-wall, dual-wall and triple-wall corrugated HDPE pipe, plus PolyCap fence cap and PolyVac vacuum tubing. CAD drawings and pipe specification files give outside diameters and corrugation pitch so you can confirm what fits your trench and connections.
- Convert pipe length into truckloads with the delivery team rather than guessing. Coil and stick lengths, diameters and fitting counts all change how a load stacks, and the lightweight flatbed design is a factor the company raises for farm delivery.
Requesting the estimate
Give the estimator your site address, delivery date window, product list with diameters and lengths, and any access constraints such as soft ground, tight gates or the need for the driver to unload unaided. Installation follows ASTM D2321, so confirm bedding and backfill plans at the same time if you want the quote to cover the full job.
A practical example: a farmer replacing field tile would run the Tile Spacing and Coil Footage tools to get linear feet, check the dual-wall specification sheet for diameter, then ask for a quote with a delivery date that avoids soil compaction risk after rain. A contractor on a highway job would instead pull state DOT approvals and CAD details first, since those often dictate which pipe profile is acceptable.
For comparison, other manufacturers publish similar sizing aids; Advanced Drainage Systems is one alternative source of HDPE pipe technical data if you are weighing suppliers.
Where can I find CAD drawings and pipe specifications for my engineering plans?
The CAD drawings and pipe specification files are both hosted on Baughman Tile Co.'s own site, under the Drainage Solutions / Engineering section. The company states that its engineering team provides the pipe and fitting details, and that pipe specifications — outside diameters, corrugation pitch and other dimensions — are available as downloadable files organized by diameter. Start at Baughman Tile Co and open the CAD Drawings and Pipe Specifications pages from the main navigation.
What each resource is for
- CAD drawings: fitting and pipe details for drafting into your plan set — useful when you need to place a structure, check a connection geometry or confirm what a detail looks like before specifying it.
- Pipe specifications: dimensional data by diameter (outside diameter, corrugation pitch and similar), which you need for trench widths, bedding calculations and clearance checks.
- Applicable pipe standards and State DOT approvals: the page listing also points to standards and approval information, which matters if your project is publicly funded or must match a state specification.
A practical next step
Pull the specification file for the exact diameter you intend to use rather than a nearby size, then cross-check the outside diameter against your trench and cover requirements before the drawings leave your desk. For installation language, the site directs users to ASTM D2321, the standard practice for underground installation of thermoplastic gravity-flow pipe — worth citing in your notes so the contractor and inspector are working from the same reference.
If your plans involve drainage layout rather than detailing, the same section includes a drainage calculator and tile spacing tool, which can help you size runs before you commit to a diameter.
What installation guidelines and joint practices apply to Baughman Tile pipe?
Baughman Tile points installers to ASTM D2321, the standard practice for underground installation of thermoplastic gravity-flow pipe, as the governing installation guideline for its products. The site also publishes its own joint installation and installation guideline pages alongside pipe specifications and CAD drawings, so the practical sequence is: confirm the pipe series and diameter, download the matching specification and drawing, then follow ASTM D2321 for bedding, backfill and jointing.
What the site provides
- Installation Guidelines page referencing ASTM D2321 for underground thermoplastic pipe.
- Joint Installation guidance listed separately from general installation.
- Pipe Specifications by diameter, covering outside diameters, corrugation pitch and related details.
- CAD Drawings from the engineering team for pipe and fitting dimensions.
- Drainage planning tools — a drainage calculator, tile spacing and coil footage — useful before ordering.
Joint practices in practice
The site separates joint installation from general burial guidance, which reflects how corrugated HDPE systems actually behave: most failures at joints come from incomplete insertion, poor alignment or backfill placed before the joint is seated. A concrete reader scenario: a contractor laying dual-wall pipe across a field entrance should check the specification file for the coupling dimensions, seat each joint fully per the joint installation page, and keep heavy compaction equipment off the joint until backfill is in place per ASTM D2321.
Decision criteria
- Pipe series matters. Single-wall, dual-wall and triple-wall pipe carry different stiffness and joint details; use the specification file for the exact diameter rather than a general rule.
- Fittings are separate. Confirm fitting dimensions from the CAD drawings before trench layout, since fitting build-out affects joint spacing.
- Delivery and handling. The company notes its own truck fleet with hydraulic gates and lift beds for unloading, and lightweight flatbeds aimed at reducing soil compaction for agricultural deliveries — relevant when planning site access.
For comparison on corrugated HDPE installation practice, the Plastics Pipe Institute publishes the corrugated pipe manual referenced on the site: Plastics Pipe Institute.
What career opportunities are available at Baughman Tile?
The site advertises a careers section under "Looking for a rewarding career?" but does not list specific open roles, departments or locations on the page. So the honest answer is: the company presents itself as hiring, but the available positions are not named there. To find current openings, use the careers page on Baughman Tile Co or call the number listed on the site (800.837.3160).
For context on where jobs are likely to sit, the page describes a manufacturer of corrugated HDPE pipe and fittings based in Paulding, Ohio, with its own fleet of 55 trucks and trailers. That points to a few plausible job families—production and machine operation, engineering and CAD/specification work, sales and customer support, and driving/delivery—but treat that as inference, not a published list.
A practical next step: check the careers page first, then call and ask which departments are hiring and whether roles are on-site in Paulding. If you are applying for an engineering or technical role, the site's CAD drawings and pipe specification pages give useful background on the products you would be working with.
User reviews (0)