Website review
This review may include AI-generated content and is not individually verified. Domain, certificate and other facts come from the observed data on this page.
What is ECIS?
ECIS stands for Electric Cell-substrate Impedance Sensing. It is a label-free, non-invasive technique for monitoring cells grown in tissue culture: cells are cultured on electrodes, and changes in electrical impedance reveal what the cells are doing in real time. Applied Biophysics describes it as an automated, cell-based assay method developed by Ivar Giaever and Charles Keese.
What it measures
Because impedance rises as cells spread and form tight junctions over the electrode, and falls when they round up, detach or die, ECIS is used for:
- TEER / barrier function — tight-junction integrity in epithelial or endothelial layers.
- Cell proliferation — increased coverage over time.
- Cell migration — movement of cells onto a wounded or bare electrode.
- Cytotoxicity — loss of signal as cells are damaged.
- Virology — virus-induced changes in host cell behaviour.
The key practical difference from endpoint assays: you get a continuous time course from the same sample, without dyes, lysis or labels that can perturb the cells.
Who it suits
Researchers who need kinetic data rather than a single snapshot — for example, tracking when a barrier breaks after a drug dose, or comparing migration rates across conditions. It is less suited to questions that require imaging a specific protein or subcellular location; ECIS tells you about the cell layer as a whole, not what any one molecule is doing.
Practical next step
If you are deciding whether ECIS fits an experiment, start with the application page closest to your question and check whether the readout maps onto your endpoint — for instance, use TEER for barrier studies and migration assays for wound-healing questions. Then request a demo or look at the published literature to see whether the assay format matches your cell type and plate throughput.
How does ECIS technology work for label-free cell monitoring?
ECIS (Electric Cell-substrate Impedance Sensing) monitors cells by growing them on a surface that contains small gold electrode arrays, then passing a weak alternating current through those electrodes. Cells attached to the electrode surface restrict the current flow, and the system records the resulting electrical impedance over time. Because impedance tracks how much of the electrode is covered and how tightly cells attach, the readout is continuous and requires no fluorescent or radioactive labels.
What the measurement reflects
The impedance signal changes with cell coverage, cell-cell junction tightness, and the distance between the cell membrane and the electrode. This is why the same platform can support several assay types:
- Barrier function / TEER-type measurements, where tight junction strength matters
- Cell proliferation, where electrode coverage rises as cells divide
- Cell migration and invasion, where coverage changes as cells move
- Cytotoxicity, where cell death or detachment reduces impedance
- Virology and other applications listed on the site
Practical setup
Cells are seeded into specialized cultureware with integrated electrodes, and the instrument logs impedance in real time inside a standard incubator. The Applied Biophysics product line includes multi-well Z-theta instruments, a TEER-focused 8-well system, the Zen Cell Owl, CO₂ incubator and hypoxia/hyperoxia stage adapters, plus a range of cultureware options. See Applied Biophysics for the current instrument list and application notes.
Trade-offs to weigh
A real strength is that you get a continuous, non-invasive time course from the same well, which is useful when a single endpoint would miss the timing of a response. The main limitation is that impedance is a composite signal: it tells you that something changed at the electrode, not which molecular event caused it. Most users pair ECIS with a confirmatory assay such as microscopy, protein analysis or a specific functional readout.
Next step
If you are deciding whether ECIS fits your work, start by defining the biological question. If you need to know when a barrier opens or closes, or how attachment changes over hours, real-time impedance is a strong fit. If you need to identify a specific pathway, plan ECIS as the kinetic layer alongside a molecular assay. The site's FAQ, glossary and webinar listings are a reasonable place to check whether your cell type and endpoint have been demonstrated before committing to a protocol.
What types of assays can be performed with ECIS instruments?
ECIS instruments support a range of label-free, real-time cell-based assays. The site lists these core application areas: TEER barrier function, cell proliferation, cell migration, cytotoxicity, and virology, along with a webinar on cell invasion/extravasation assays. Because the readout is electrical impedance rather than a dye or label, the same well can be followed continuously over minutes to days, which suits kinetics questions (when does barrier breakdown start?) more than single-endpoint snapshots.
H3 What each assay measures and who tends to use it
| Assay type | What you monitor | Typical user |
|---|---|---|
| TEER / barrier function | Tight-junction integrity of epithelial or endothelial monolayers | Blood-brain barrier and gut-permeability researchers |
| Proliferation | Increases in cell coverage and attachment over time | Cancer biology, drug-response screening |
| Migration | Movement of cells into a wounded or open electrode area | Wound-healing and metastasis studies |
| Cytotoxicity | Loss of attachment and membrane integrity after treatment | Toxicology and compound safety testing |
| Virology | Viral cytopathic effects and infection kinetics | Virology labs studying viral entry or spread |
| Invasion / extravasation | Cells crossing a barrier model | Metastasis and immune-cell trafficking work |
H3 Practical trade-offs
The main advantage is that impedance responds to cell shape, attachment and coverage, so you get a continuous record without lysing or staining samples. The trade-off is that impedance is a composite signal: it tells you something changed, but not always which molecular pathway caused it. Most groups pair ECIS with a confirmatory endpoint assay, such as microscopy or a biochemical marker, when the mechanism matters.
H3 A concrete scenario
Suppose you are testing whether a drug candidate tightens an endothelial barrier. You seed cells on an electrode array, let the monolayer stabilize, add the compound, and watch TEER rise or fall in real time. You can then add a permeability challenge and see whether the compound blunts the response. That single experiment yields dose and timing information that would otherwise require many separate plates.
H3 Next step
Match your biological question to the list above, then confirm instrument and cultureware compatibility for your plate format. The site's "What is ECIS?" and FAQ pages explain the underlying measurement; Applied Biophysics also offers a demo request and technical support for assay setup questions.
How does ECIS compare to traditional TEER measurements for barrier function studies?
ECIS and traditional TEER (trans-epithelial/endothelial electrical resistance) answer related but not identical questions. Traditional TEER typically gives you a single resistance value at a chosen time point, while ECIS (Electric Cell-Substrate Impedance Sensing) records impedance continuously across a range of frequencies in real time, without labels or invasive handling. That difference shapes which experiments each approach suits.
What each method actually measures
Traditional TEER usually means an electrode pair (often chopstick or chamber electrodes) placed across a cell layer on a permeable filter. You get resistance normalized to membrane area, usually in Ω·cm². It is widely used, inexpensive, and familiar across epithelial and endothelial biology.
ECIS grows cells directly on small gold film electrodes in the culture well. The system applies a small alternating current and measures impedance as cells attach, spread, and form junctions. Because impedance is frequency-dependent, you can separate contributions from cell coverage, cell-substrate attachment, and barrier tightness rather than collapsing everything into one number. Applied BioPhysics, the company behind ECIS, describes it as a label-free, non-invasive method for monitoring cells in tissue culture, and its application pages cover TEER/barrier function, proliferation, migration, cytotoxicity, and virology.
Comparison at a glance
| Dimension | Traditional TEER | ECIS |
|---|---|---|
| Readout | Single resistance value per time point | Impedance over time and frequency |
| Time resolution | Discrete measurements | Continuous, real-time |
| Handling | Electrode placement, often repeated | Cells cultured on electrodes; no repeated probing |
| Barrier vs. coverage | Combined in one number | Can be modeled separately |
| Throughput | Varies; often lower | Multi-well formats available |
| Cost and setup | Generally lower | Instrument and consumables investment |
| Familiarity | Long-established standard | More specialized |
Practical trade-offs
Traditional TEER is the pragmatic choice when you need a quick, accepted endpoint, when your lab already has electrodes and a volt-ohm meter, or when you want results directly comparable to published Ω·cm² values. Its weakness is that a falling resistance can mean tight-junction disruption, cell death, or cell detachment, and a single time point cannot distinguish them.
ECIS is stronger when the dynamics matter: tight-junction assembly after calcium switch, barrier breakdown during cytokine exposure, or recovery after a toxic insult. Continuous recording also reduces sampling error and lets you catch transient effects between conventional time points. The trade-off is that you interpret impedance, not resistance, so you need to model or at least understand what the frequency response is telling you, and you need the instrument and electrode consumables.
Choosing for a specific study
Ask what your hypothesis requires. If you need a standard barrier endpoint for a permeability correlation, TEER may be sufficient. If you are studying kinetics, reversibility, or want to separate barrier function from cell coverage in the same well, ECIS gives richer information.
For a mixed approach, many labs use ECIS for continuous monitoring and confirm key time points with a conventional permeability tracer such as FITC-dextran or with TEER. That pairing addresses the main criticism of impedance alone: it reports on the cell layer but not on which specific molecules cross it.
A useful next step is to review the barrier function and application material on Applied Biophysics and compare its ECIS formats and cultureware options against the throughput and electrode setup your current TEER workflow uses, then decide whether you need continuous data or a standard endpoint.
What are the key differences between the Z-theta 16-well and 96-well systems?
The main difference is throughput versus per-well control and sample demand. The 16-well Z-theta is the smaller, more flexible format; the 96-well Z-theta is the higher-throughput format for larger experiments. Both are ECIS-based instruments, meaning they monitor cells label-free and in real time through electrical impedance, so the choice is mostly about how many conditions you need to run and how much of each sample you can spare.
What actually differs
| Consideration | Z-theta 16-well | Z-theta 96-well |
|---|---|---|
| Throughput | Lower; fits smaller studies and pilot work | Higher; built for larger matrices and screens |
| Well format | 16 wells | 96 wells |
| Typical use | Method development, small condition sets, limited-sample work | Dose-response panels, many replicates, compound or gene screens |
| Sample economy | Generally easier to run with scarce cells or reagents | More efficient per data point once you have enough sample |
| Practical trade-off | More hands-on flexibility, less parallel capacity | More parallel capacity, less suited to tiny experiments |
How to choose
- Pick the 16-well if you are optimizing a protocol, testing a handful of conditions, or working with primary cells or expensive reagents where you cannot fill a plate.
- Pick the 96-well if your question requires many concentrations, replicates, or time points in one run, and you can supply enough cells and compound.
- Consider the assay first. Barrier function, proliferation, migration, cytotoxicity and virology work all appear on the site as ECIS applications. High-replicate barrier or cytotoxicity panels lean toward 96-well; exploratory migration or invasion work often starts smaller.
Next step
List your experiment as a grid: conditions × replicates × time points. If that grid exceeds roughly 16 wells with controls, the 96-well format saves you repeat runs. If it fits comfortably, the 16-well keeps sample use and setup simpler. You can compare the two instruments directly at Applied Biophysics and request a demo through their contact page.
How can researchers schedule a demo or training for ECIS systems?
Researchers can request an ECIS demonstration through the "Schedule a Demo" or "Request Demo" link on the Applied Biophysics site, and can arrange training through the company's ECIS School and webinar program. Both paths are handled directly by the vendor rather than through a self-service booking calendar.
Demos. The demo request is the front door for labs evaluating whether electric cell-substrate impedance sensing fits their workflow. Expect the vendor to follow up by phone or email; the site lists 9am–5pm EST support hours and a toll-free line, 866-301-ECIS (3247), alongside the Troy, New York office number. A demo is most useful when you bring a defined assay question — for example, barrier function in epithelial monolayers, migration, proliferation or cytotoxicity — so the session can map instrument options such as the 16-well and 96-well Z-theta, the TEERZ 8wTFA, or the Zen Cell Owl to your plate format and incubator setup.
Training. Formal instruction runs through ECIS School, a two-day course in Troy, NY, with dates posted as they are confirmed. The site also offers webinars; one listed example covers cell invasion and extravasation assays. Webinars suit a scattered team or a first look at the method, while the in-person course is the better fit when several people need hands-on time with instrumentation and cultureware.
How to choose
| Goal | Best route |
|---|---|
| Decide whether to buy | Schedule a demo |
| Learn the method broadly | Webinar |
| Train multiple users hands-on | ECIS School (Troy, NY) |
| Ongoing technical problems | Technical support line or email |
Practical next step. Before requesting either, write a one-page summary of your cell type, substrate, assay endpoint and timeline. Ask specifically whether your own cultureware and incubator configuration can be used during the demo, and whether the training covers data analysis as well as instrument operation. If your institution already uses ECIS, ask an existing user lab first — the site's ECIS Users and referral program pages suggest the company maintains that community — then confirm scheduling details with the vendor, since course dates and demo availability change.
For general context on impedance-based and barrier assays, the vendor's own publications list and glossary are reasonable starting points; broader method background is available from resources such as NIH and NIST.
User reviews (0)