Website review
This review may include AI-generated content and is not individually verified. Domain, certificate and other facts come from the observed data on this page.
What is Fish Creations?
Fish Creations is a taxidermy studio specializing in catch-and-release fish reproductions. Rather than mounting the actual fish you caught, it makes fiberglass replicas based on your catch, so the real fish can be released while you still get a wall trophy. The studio describes its work as award-winning, notes that it makes its own molds, and says it maintains a large line of bass molds.
What it offers
- Custom fiberglass reproductions of caught fish, marketed to catch-and-release anglers
- A selection of already-finished fish for sale to the public, with species, availability, and prices provided on request
- Guidance for buyers on what to ask any taxidermist, such as whether fins are thick or thin and natural, whether the mouth is molded or carved, whether the backside is finished, and whether seams are finished
Who it's for
Anglers who release their catch but want a lasting trophy, and anyone shopping for a finished reproduction rather than commissioning one. The studio's own advice is aimed at helping customers avoid poor-quality work, which suggests it expects buyers to comparison-shop.
A practical next step
If you're considering a reproduction, use Fish Creations' question list as a checklist for any taxidermist you contact, not just this one. Ask each studio to send photos of finished fish, especially close-ups of fins, the mouth, the backside, and seams, and compare those against the specific fish you caught. For a finished piece already in inventory, ask for the species and a photo before committing. You can reach the studio at the phone number listed on Fish Creations and request its mailing list of available fish.
How does catch and release taxidermy work?
Catch-and-release taxidermy replaces the real fish with a hand-finished replica, usually cast in fiberglass from a mold. You photograph and measure the catch, release it, and the taxidermist builds a mount from those records plus a matching mold.
At Fish Creations, the process is described as making their own molds, including what they call the largest line of bass molds. That matters because a custom mold is expensive to create; a shop with a deep mold library can match more species and body shapes without charging you for original sculpting.
What you provide
- Length, girth and weight if you have it
- Clear photos from the side, plus close-ups of the head, fins and any markings
- The release photo or a witness detail, if the fish went back
What the shop does
- Selects or builds a mold close to your fish's proportions
- Casts the body, then finishes fins, mouth, seams and backside
- Paints the pattern from your photos, since colors fade quickly after death
The replica approach suits anglers who release fish, keep trophies in states or seasons where keeping is restricted, or want a mount that will not crack, shrink or attract pests over time.
Fish Creations stresses the questions to ask any taxidermist before committing: are the fins thin and natural rather than thick slabs, is the mouth molded rather than carved, is the back finished, and are the seams cleaned up. Those four points separate a convincing mount from an obviously artificial one, and they are worth asking about in writing.
For a reader deciding: if you have good photos and measurements, a reproduction is the practical route. If you have no photos and only a memory, the mount will be an artist's interpretation rather than your fish, so ask to see comparable finished work first.
What should I ask a taxidermist before commissioning a fish reproduction?
Before you commission a fish reproduction, ask about the details that separate a lifelike mount from a stiff, obviously artificial one. Fish Creations' own guidance to prospective customers centers on four questions: whether the fins are thin and natural rather than thick, whether the mouth is formed from a mold instead of carved by hand, whether the back side of the fish is finished, and whether the seams are finished. Those four points are a good baseline because they affect how the fish looks from every angle, not just head-on.
What to ask and why it matters
- Fins: Thin, natural fins mimic a real fish; thick fins look molded and heavy. Ask how the fins are made and whether they are cast or hand-shaped.
- Mouth: A molded mouth tends to hold realistic detail. A carved mouth can work, but ask to see examples so you can judge the result.
- Back side: If the fish will hang where people can walk behind it, an unfinished back is a giveaway. Ask whether the back is completed.
- Seams: Visible seams along the body undercut the illusion. Ask how seams are finished and inspect a finished piece up close.
- Molds and materials: Fish Creations says it makes its own molds and offers fiberglass reproductions, with a large line of bass molds. Ask any taxidermist whether they cast their own molds or source them, since that affects consistency and available species.
- References and examples: Request photos or, better, see finished work in person. The site itself advises sending for pictures and asking questions before spending money.
A practical next step
If you are comparing taxidermists, bring the same short list to each one and ask for close-up photos of fins, mouths and seams on a completed fish. A studio that welcomes those questions and can show detailed examples is usually a safer choice than one that deflects them. For catch-and-release anglers specifically, confirm the studio works from photographs and measurements, since that is the model Fish Creations describes for its fiberglass reproductions.
You can see the studio's own framing of these questions at Fish Creations.
Are there ready-made fish reproductions available for purchase?
Yes. The site states that Fish Creations keeps "dozens of newly finished fish" in inventory for sale to the general public, described as priced to sell and cost-effective. So you are not limited to commissioning a reproduction from your own catch — you can buy a finished piece outright.
How to buy a ready-made piece
The site does not sell online. To find out what is on hand, you contact them directly and ask about species, availability and prices. It also offers to mail a complete listing if you send your name and address by post.
Commission vs. ready-made
| Ready-made inventory | Custom reproduction | |
|---|---|---|
| What you get | A finished fish already in stock | A reproduction of your own catch |
| Best for | Decorating a wall, a gift, buyers without a specific fish | Anglers who want their particular catch memorialized |
| Main constraint | Limited to species currently available | Requires a fish to reproduce, plus lead time |
| First step | Ask what species are in stock | Ask about molds, fins, mouth and finish details |
What to ask either way
The site itself urges prospective customers to interrogate the work rather than assume quality, and the questions it suggests are worth using on ready-made pieces too:
- Are the fins thick, or thin and natural like a real fish?
- Is there a mouth mold, or does the taxidermist carve one in?
- Is the back side of the fish finished?
- Are the seams finished?
Those four answers tell you more about a reproduction than a photo will, because a finished back and clean seams matter if the piece will ever be seen from the side or handled.
Practical next step
If you want a specific species — say a peacock bass, given the award-winning example shown on the site — call and ask whether it is in current inventory before assuming you need to catch one yourself. If you are shopping for a display piece rather than a personal trophy, ready-made is usually the faster and cheaper route; if the fish has sentimental value, a custom order is the only way to get that exact catch. For a second opinion on quality standards in the field, the Taxidermy.Net forums are a long-running community where buyers discuss fin work and finishing details.
How much does a custom fish reproduction cost?
Custom fish reproduction pricing is quote-based, not list-priced. On Fish Creations, the pricing page is a contact point rather than a rate card: you ask about species, availability and prices, and they mail a listing. That is typical for made-to-order fish work, because cost depends on the species, the size of your catch, the mold used and how much finishing detail you request.
What drives the price
- Species and mold availability. A shop with an existing mold for your species and length avoids new mold-making, which is the most expensive part of a one-off job. Fish Creations states it makes its own molds and holds a large bass mold line.
- Size. More material, more finishing time and higher shipping cost on a larger mount.
- Detail level. The page itself tells buyers to ask whether fins are thick or thin and natural, whether there is a mouth mold or a carved mouth, whether the back is finished, and whether seams are finished. Each of those answers reflects labor, and labor is what you are paying for.
- Mount style and presentation. Wall mount versus a more elaborate display, plus any habitat or backdrop work.
- Shipping. A finished reproduction is bulky and fragile; crating and freight add to the total.
A practical way to get a real number
- Photograph your catch with a ruler or tape for length and girth, and note the species.
- Contact the shop with those measurements and ask for a quote on that species and size, plus what the quoted finish includes.
- Ask what a comparable finished fish from their current inventory would cost instead. Fish Creations says it keeps dozens of newly finished fish for sale, priced for quick sale — often the faster and cheaper route if you are not set on an exact match to your catch.
- Ask about turnaround time and the deposit before committing.
Quick comparison
| Route | Cost pattern | Best for |
|---|---|---|
| Custom reproduction of your catch | Highest; driven by species, size and finishing | Anglers who want their specific fish |
| Finished fish from existing inventory | Lower, since labor is already done | Buyers who care more about the look than the exact catch |
| Skin mount | Varies; often cheaper upfront | Those who accept less durability over decades |
For a reader scenario: if you released a trophy bass and want it on the wall, get a quote for your exact length first, then ask what they have finished and ready — the second number is usually the one that decides it.
What species of fish can be reproduced?
Fish Creations does not publish a fixed species list. Its stated position is broad: "If you can catch it, we can reproduce it," and it says it makes its own molds and carries "the largest line of bass molds in the world." So bass are the clearest strength, while other freshwater and saltwater catches are handled case by case.
For a specific species, the practical step is to ask before committing:
- Species and size — send the species, length and girth, plus a photo if you have one.
- Mold availability — ask whether a mold already exists or one must be made, since that affects both cost and timeline.
- Reference material — good photos of fins, mouth and coloration help a reproduction match your actual catch.
- Backside and seams — ask whether the fish is finished on the back and whether seams are finished, two questions the site itself tells customers to raise.
A reader scenario: you released a personal-best largemouth and only have photos and measurements. That is exactly the catch-and-release case this studio is built around, and bass molds are its deepest inventory. A less common species, such as a peacock bass or a saltwater fish, is likelier to require a custom mold — worth confirming by phone before you ship measurements or pay a deposit.
To proceed, contact the studio with your species, measurements and photos, and request its current listing of finished fish and available molds; the site directs inquiries to (214) 662-1266.
User reviews (0)