ecochem.biz

EcoChem Analytics is a manufacturer of analytical instrumentation and Continuous Emissions Monitoring Systems (CEMS), positioning itself as a single-source supplier that covers an entire monitoring project "from probe to printout." The company builds its own analyzer, probe, and data acquisition software, which means buyers dealing with multiple gas components, particles, or regulatory reporting can source the full measurement chain from one vendor rather than integrating parts from several suppliers.

What EcoChem makes

EcoChem's product line is organized around stack monitoring systems and the components that feed them.

The MC3 is the centerpiece: EcoChem states it can measure NH3, HCl, HF, NOx, N2O, SO2, CO, CH4, H2O, CO2, and O2 in a single analyzer, with capacity for up to 8 components plus O2. That multi-component capability is the main reason a facility might choose it over separate single-gas analyzers — fewer instruments, one integration point, and one vendor responsible for the result.

Industries and applications

EcoChem lists its target sectors as:

• Energy-from-waste facilities
• Fertilizer production
• Chemical and petrochemical plants
• Coal- and gas-fired power plants
• Cement kilns
• Industrial boilers

These are all environments where continuous emissions monitoring is either regulated or operationally necessary, and where the measured species (NOx, SO2, HCl, HF, NH3, mercury, PAH, particles) overlap with what EcoChem's instruments target.

The "total responsibility" model

The company's stated differentiator is ownership of the whole system. Because EcoChem manufactures the analyzer, probe, and data acquisition software itself, it argues there are no coverage gaps or divided responsibility between vendors when something goes wrong. For a plant running a compliance-critical CEMS, that matters: a fault could sit in the sample probe, the analyzer, or the reporting software, and having one supplier accountable for all three simplifies troubleshooting and service.

Getting pricing and more detail

EcoChem does not publish prices on its site. It directs interested buyers to a "Pricing and Quotes" page and a "Get a Quote" link, so pricing is quote-based and depends on configuration. The site also offers brochures, an installations library, and a user area, and lists contact details at +(281) 338-9888 and [email protected].

If you are evaluating CEMS vendors, the practical next step is to request a quote with your specific gas list, stack conditions, and reporting requirements — that is the information EcoChem needs to confirm whether the MC3 configuration fits your application.

EcoChem Analytics builds continuous emissions monitoring systems (CEMS) and analytical instruments for criteria pollutants, mercury, PAH (polycyclic aromatic hydrocarbons), and particles. The core of a typical EcoChem CEMS is the MC3 multicomponent IR gas analyzer, which the company says can measure up to 8 gas components plus O2 in a single unit — including NH3, HCl, HF, NOx, N2O, SO2, CO, CH4, H2O, and CO2. This makes the system relevant to facilities that need continuous flue gas monitoring across a broad set of pollutants rather than a single gas.

Pollutants and measurement targets

EcoChem's product line covers several categories of emissions and air-quality measurements:

The MC3 is described as specifically designed for continuous monitoring of a flue gas stream. The PAS 2000 is a real-time ambient air monitor for carbon aerosol, and EcoChem also lists compact real-time monitors for particulate matter.

What a complete EcoChem CEMS includes

EcoChem emphasizes single-source supply — "Total Responsibility ... From Probe to Printout" — because it manufactures its own analyzer, probe, and data acquisition system. A typical MC3-based CEMS is delivered as a standalone cabinet or panel and combines:

• MC3 analyzer — the multicomponent measurement core
• PLC and sample system components — for handling and conditioning the gas sample
• HW5 Heated Probe — stack interface; its design allows the entire probe to be removed without pulling the flange
• Cemtrac3 Data Acquisition System — software for emission compliance and regulatory reporting
• Hovacal — a portable calibration gas generator for gas-vapor mixtures with selectable humidity

Where these systems are used

EcoChem lists the following industries among its applications:

• Energy-from-waste facilities
• Fertilizer production
• Chemical and petrochemical plants
• Coal- and gas-fired power plants
• Cement kilns
• Industrial boilers

These are settings where multiple regulated pollutants must be tracked continuously and reported for compliance.

Choosing the right configuration

The right setup depends on which pollutants you are required to monitor and whether you need stack measurement, ambient monitoring, or both. If your permit covers a broad set of gases, the MC3's ability to measure up to 8 components plus O2 in one analyzer reduces the number of separate instruments. If carbon aerosol or particulate matter is the target, the PAS 2000 or the particulate monitors are the relevant products. For mercury and PAH, confirm the specific configuration with EcoChem, since the website states these as monitoring capabilities without listing a dedicated standalone analyzer for each.

For pricing, EcoChem provides a "Pricing and Quotes" page and a "Get a Quote" link, so exact costs and system configuration are handled through a quote request rather than published list prices.

EcoChem Analytics is worth considering when you want a single supplier accountable for the entire emissions monitoring chain—analyzer, probe, and data acquisition system—rather than integrating components from multiple vendors. The company manufactures its own MC3 analyzer, HW5 heated probe, and Cemtrac3 data acquisition software, and positions this as "Total Responsibility ... From Probe to Printout." That single-source model is the main differentiator; it matters most if you want to avoid gaps in coverage and divided responsibility across suppliers.

What EcoChem actually makes

EcoChem describes itself as a manufacturer of analytical instrumentation and Continuous Emissions Monitoring Systems (CEMS) for criteria pollutants, mercury, PAH (polycyclic aromatic hydrocarbons), and particles. Its product line includes:

• MC3 Analyzer — a multicomponent IR gas analyzer designed for continuous monitoring of a flue gas stream. It measures NH3, HCl, HF, NOx, N2O, SO2, CO, CH4, H2O, CO2, and O2 in a single analyzer (up to 8 components plus O2).
• PAS 2000 Photoelectric Aerosol Sensor — a real-time ambient air monitor for carbon aerosol.
• HW5 Heated Probe — a probe whose design allows the entire probe to be removed without pulling the flange.
• MC3-based CEMS — a standalone system in a cabinet or panel, combining the MC3 analyzer, PLC, and sample system components.
• Cemtrac3 Data Acquisition System — software for emission compliance and regulatory reporting.
• Hovacal — a portable calibration gas generator for gas-vapor mixtures with selectable humidity.

The single-source argument

The core claim in EcoChem's own materials is that because it manufactures the analyzer, probe, and data acquisition system itself, you get one source of supply for the whole project—"complete ownership of the entire system without gaps in coverage and without division of responsibility."

That is a real structural difference from assembling a CEMS from separate analyzer, probe, and DAHS vendors. It is most valuable when:

• You want one party accountable for system performance end to end.
• You want to minimize the coordination burden of multi-vendor integration.
• You expect to need ongoing service and support over the system's life.

It is less of a differentiator if you already have preferred component vendors, or if you only need a single instrument rather than a full integrated system.

Stated commitments

EcoChem states its mission is to provide the best possible analyzer and system experience through excellence in design, manufacture, operation, service, and support. It also states that when you purchase an analyzer or system, it takes total responsibility to ensure accurate results while minimizing system downtime. These are vendor commitments rather than independently verified performance claims—treat them as the standard you would hold the supplier to in a contract or service agreement.

Industries served

EcoChem lists the following among the industries it serves: energy-from-waste facilities, fertilizer production, chemical and petrochemical plants, coal and gas-fired power plants, cement kilns, and industrial boilers. If your application falls in one of these categories, the product line is likely a fit; if it does not, confirm applicability directly.

How to evaluate before deciding

1. Match the analyte list to your permit. Check that the MC3's measurable components (NH3, HCl, HF, NOx, N2O, SO2, CO, CH4, H2O, CO2, O2) cover what your monitoring requirement demands.
2. Decide whether you want a full system or components. The single-source advantage only applies if you buy the integrated CEMS rather than individual parts.
3. Ask about service and support terms. The "total responsibility" positioning is only as strong as the service agreement behind it.
4. Request pricing and a quote. EcoChem provides a Pricing and Quotes page and a "Get a Quote" link; pricing is not published, so you will need to contact them for figures.
5. Check the installation library. The site includes an Installations section and a Library/User Area, which can help you assess prior deployments.

Contact

Phone: +(281) 338-9888 Email: [email protected]

For current pricing, lead times, and configuration details, use the quote request rather than assuming published terms—none are stated on the site.

EcoChem Analytics provides a dedicated Pricing and Quotes page on its website, with a "Get a Quote" link available from the main navigation. To get a quote, start there and be ready to describe your monitoring application — the pollutants you need to measure, how many components, and where the system will be installed. If you prefer to talk it through first, the company lists a phone number and email address on its site.

Step 1: Go to the Pricing and Quotes Page

EcoChem's site has a direct entry point for pricing requests:

• Pricing and Quotes page: https://www.ecochem.biz/pricing-and-quotes/
• An alternate link also appears at http://www.ecochem.biz/ecochem/pricing-and-quotes/
• The "Get a Quote" link is reachable from the site navigation and homepage.

The site does not publish prices or a self-service quote form with fixed fields, so expect the process to involve describing your project rather than picking a product from a list.

Step 2: Define What You Need to Monitor

EcoChem builds both individual analyzers and complete Continuous Emissions Monitoring Systems (CEMS). The quote will depend heavily on which of these you need. Use the product lines below to frame your request.

Know the MC3 component limits

The MC3 measures NH3, HCl, HF, NOx, N2O, SO2, CO, CH4, H2O, CO2, and O2 in a single analyzer, with up to 8 components plus O2. If your permit or process requires more than that, say so up front — it affects whether one analyzer is enough.

Step 3: Describe Your Application and Industry

EcoChem's stated markets give you a useful checklist for the project background a quote request should include. Mention your sector if it matches one of these:

• Energy-from-waste facilities
• Fertilizer production
• Chemical and petrochemical plants
• Coal- and gas-fired power plants
• Cement kilns
• Industrial boilers

Also state whether you need a standalone system (cabinet or panel) or individual components, and whether regulatory reporting is part of the requirement — that points toward including Cemtrac3.

Step 4: Contact EcoChem Directly

The site lists these contact details:

• Phone: +(281) 338-9888
• Email: [email protected]

Use these if the quote page does not cover your case, or if you want to confirm scope before submitting a request. There is also a Contact page and a User Area on the site.

What to Have Ready Before You Ask

Because EcoChem positions itself as a single-source supplier — "Total Responsibility ... From Probe to Printout" — a complete request helps them quote the whole chain rather than one box. Prepare:

1. Target pollutants and component count (which gases, how many, plus O2 if needed).
2. Application type — CEMS for compliance, ambient air monitoring, or process measurement.
3. Installation context — stack monitoring, ambient, or cabinet/panel installation.
4. Industry and site conditions that affect probe and sample system selection.
5. Reporting obligations, if you need compliance and regulatory output.
6. Calibration needs, if you want the Hovacal included.

Common Points to Clarify Early

• Prices are not published. The site routes you to a quote request rather than listing figures, so budget expectations come from the response, not the website.
• Single-source vs. components. EcoChem manufactures its own analyzer, probe, and data acquisition system. Deciding whether you want the full integrated package or individual instruments changes the quote shape.
• Component ceiling. Confirm your required gas list fits within the MC3's up-to-8-components-plus-O2 capacity before assuming one analyzer covers everything.
• Probe maintenance. The HW5's removable-without-pulling-flange design is worth raising if access for maintenance is a constraint at your site.

If your requirement is straightforward, the Pricing and Quotes page plus a clear pollutant list is enough to start. If it involves multiple streams, regulatory reporting, or unusual site conditions, call or email first so the quote reflects the full system rather than a partial one.

The EcoChem MC3 is a multicomponent infrared (IR) gas analyzer built for continuous monitoring of a flue gas stream. It is the core measurement component in EcoChem's Continuous Emissions Monitoring Systems (CEMS), and it is designed to measure multiple gases in a single instrument — up to 8 components plus O2 — rather than requiring a separate analyzer for each gas.

What the MC3 Measures

According to EcoChem, the MC3 provides a complete solution for measuring the following components in one analyzer:

• NH3 (ammonia)
• HCl (hydrogen chloride)
• HF (hydrogen fluoride)
• NOx (nitrogen oxides)
• N2O (nitrous oxide)
• SO2 (sulfur dioxide)
• CO (carbon monoxide)
• CH4 (methane)
• H2O (water vapor)
• CO2 (carbon dioxide)
• O2 (oxygen)

The key constraint to note: the analyzer supports up to 8 components plus O2 in a single unit. If your monitoring requirement includes more gases than that, you would need to confirm the configuration with EcoChem directly.

How the MC3 Fits into a CEMS

The MC3 is not sold only as a standalone analyzer. EcoChem also builds MC3-based CEMS as complete systems, available as either:

• A standalone system cabinet, or
• A panel configuration

These systems combine the MC3 analyzer with a PLC and sample system components. Because EcoChem manufactures its own analyzer, probe, and Data Acquisition System, the company describes its approach as "Total Responsibility ... From Probe to Printout" — meaning a single source of supply for the entire project rather than splitting responsibility across multiple vendors.

Related EcoChem hardware that may appear alongside the MC3 in a monitoring setup includes:

Where the MC3 Is Used

EcoChem lists the following industries among the typical applications for its analytical systems:

• Energy-from-waste facilities
• Fertilizer production
• Chemical and petrochemical plants
• Coal- and gas-fired power plants
• Cement kilns
• Industrial boilers

These are all combustion or process environments where continuous flue gas monitoring is required, which matches the MC3's stated purpose as an analyzer for continuous flue gas stream monitoring.

What to Check Before Choosing the MC3

Because the MC3 is configured around a specific set of measured components, the practical questions to resolve are:

1. Which gases do you need to monitor? Compare your required list against the components above, and confirm that your combination fits within the 8-components-plus-O2 limit.
2. Do you need just the analyzer, or a full CEMS? EcoChem offers both the MC3 analyzer and MC3-based CEMS in cabinet or panel form, so the scope of supply matters.
3. What reporting and calibration support do you need? The Cemtrac3 data acquisition system and Hovacal calibration gas generator are separate products in the same ecosystem.
4. Pricing and configuration. EcoChem provides a "Pricing and Quotes" page and a "Get a Quote" link, so specific pricing is handled through a quote request rather than published figures.

For a definitive answer on whether the MC3 covers your exact gas list and site conditions, the quote request route is the appropriate next step, since configuration and pricing depend on the specific application.