jacoproducts.com

Jaco Products works with three separate material sets, one for each of its core processes: CNC machining, injection molding, and stamping/die cutting. If your part is already designed around a specific resin, the fastest way to check fit is to match your material to the process list below. Note that the lists are process-specific — a material available for machining is not automatically offered for molding, and vice versa.

CNC Machining Materials

Jaco's machining capabilities cover complex parts and high-tolerance work, including 5-axis CNC plastic machining, from prototype through high-volume production.

If your part requires tight tolerances or a one-off/prototype quantity, this is the list to check first.

Injection Molding Materials

Molding is the route for higher-volume production of complex parts. Jaco's molding material set includes:

• ABS — general-purpose housings and covers
• Acetal (Celcon, Delrin) — molded precision mechanical parts
• Nylon 6/6 and glass-filled nylon — strength and stiffness where needed
• Polypropylene — cost-effective, chemical-resistant parts
• HDPE — durable, low-absorption components
• Polycarbonate — impact-resistant parts
• PC/ABS alloy — a balance of impact strength and processability
• Ultem — high-temperature molded components
• PBT (Valox, Crastin) — electrical and structural parts
• Polystyrene — rigid, low-cost components
• Thermoplastic elastomers (Isoplast, Santoprene) — flexible or soft-touch parts
• Acrylic — clear molded components

A practical check: if your design calls for glass-filled nylon or a PC/ABS alloy, molding is the listed process; if it calls for G-10 or FR-4, those appear only under machining.

Stamping and Die-Cutting Materials

For thin-sheet and insulating components, Jaco lists these materials:

• Nomex® — heat-resistant electrical insulation
• Mylar® polyester — thin insulating and barrier films
• Polyester — general sheet components
• Kapton® — high-temperature flexible insulation
• Vulcanized fiber — rigid, tough sheet parts

Stamping/die cutting suits flat parts such as insulation barriers, gaskets, and shims rather than three-dimensional machined or molded geometry.

How to Match Your Part to a Process

Use these three questions in order:

1. Is the part flat and thin? Start with stamping/die cutting and check the Nomex/Mylar/Kapton/vulcanized fiber list.
2. Is it a 3D part in low-to-moderate quantity, or does it need very tight tolerances? Check the CNC machining list, especially if your material is PEEK, Ultem, G-10/FR-4, or UHMWPE.
3. Is it a 3D part headed for volume production? Check the injection molding list; if your resin appears only in the machining list, expect a material or process conversation rather than a direct match.

Jaco also notes that it serves industries including electronics, medical devices, aerospace, automotive, food and safety (FDA-compliant components), healthcare and beauty, industrial equipment, and recreation and toys — useful context if your part must meet sector-specific material expectations.

For anything not on these lists, or where a part spans two processes (for example, a machined prototype later moved to molding), request a quote with your drawing and resin specification so the material and process can be confirmed together.

Jaco Products serves eight industries: electronics, medical devices, aerospace, automotive, food and safety, healthcare and beauty, industrial equipment, and recreation and toys. If your project falls within one of these sectors, the company's CNC machining, injection molding, stamping/die-cutting, and mold/platen insulation services are positioned to support it. The company describes itself as a U.S.-based manufacturer operating since 1948, with capabilities spanning prototype work through high-volume production.

Industry-by-Industry Breakdown

The table below pairs each industry with the needs Jaco Products highlights and the materials or processes that typically address them, based on the company's stated capabilities.

How Processes Map to Industry Requirements

The four service lines are not interchangeable; each fits different part geometries and volumes.

• CNC machining suits high-tolerance, low-to-medium volume parts and prototypes. The company cites advanced 5-axis CNC plastic machining and lists Delrin, nylon, HDPE, FR-4, G-10, PEEK, polycarbonate, acrylic, Ultem, and UHMWPE as machining materials. This is the natural fit for aerospace and medical components where tolerances are tight and quantities are modest.
• Injection molding fits repeatable, higher-volume production. Material options include ABS, acetal, nylon 6/6, glass-filled nylon, polypropylene, polycarbonate, PC/ABS alloy, Ultem, PBT, polystyrene, thermoplastic elastomers, and acrylic. Automotive, healthcare and beauty, and recreation and toys are the clearest molding candidates.
• Stamping/die-cutting addresses thin-sheet and film components rather than solid parts. Listed materials are Nomex®, Mylar®, polyester, Kapton®, and vulcanized fiber—useful for electronics insulation and aerospace thermal barriers.
• Mold and platen insulation is a specialized offering rather than a general part-making service; it is relevant to industrial equipment and tooling applications.

Judging Whether Your Industry Is Covered

Use these questions to decide whether Jaco Products is a plausible fit before requesting a quote:

1. Does your sector appear in the list above? If yes, the company already frames its services around your requirements. If your industry is outside the eight listed—for example, consumer packaging or marine—the site offers no explicit evidence of experience, so ask directly.
2. Does your material appear in the relevant list? The site separates machining, molding, and stamping materials. Confirm your resin is named under the process you need; a material listed only for machining is not evidence it is offered for molding.
3. Does your volume match the process? Prototype through high-volume production is stated as supported. For very low quantities of a molded part, machining is usually the more practical route.
4. Do you have a compliance requirement? The site references FDA-compliant components for food and safety work. For other certifications, the page does not list them, so raise the question in your inquiry.

What the Site Does and Does Not Confirm

The page establishes industry coverage, material options, process types, U.S. manufacturing, and a history dating to 1948. It also mentions quick lead times, affordable pricing, and quality control processes, but gives no specific lead-time figures, price ranges, or certification names. Treat those claims as directional and confirm the details—tolerances, certifications, and delivery schedules—when you contact the company or request a quote.

To reach Jaco Products, use the Contact Us or Request a Quote actions on jacoproducts.com — the site lists both as the entry points for getting in touch and starting a quote. Before you submit, gather your part's material, manufacturing process, tolerance requirements, and production volume so the request can be routed and answered accurately. Jaco is based in Ohio and describes itself as serving customers nationwide, so out-of-state buyers can inquire through the same channels.

What Jaco Products Does

Jaco Products has manufactured and supplied plastic products in the United States since 1948 — more than 70 years — and positions itself as a precision plastic products manufacturer in Ohio. Its listed services are:

• Precision CNC machining (including advanced 5-axis plastic machining)
• Plastic injection molding
• Plastic stamping / die cutting
• Mold and platen insulation
• Plastic distribution

The company states it handles work from prototype manufacturing through high-volume production, with U.S.-based quality control.

How to Start a Quote Request

Step 1: Go to the official site

Open jacoproducts.com directly rather than relying on third-party directories, which may carry outdated contact details. The site's own Contact Us and Request a Quote links are the intended channels.

Step 2: Choose the right entry point

• Request a Quote — for a specific part or project where you want pricing and lead-time information.
• Contact Us — for general questions about capabilities, materials, or fit for your application before you have a defined part.

Step 3: Prepare the details that determine the quote

A plastic parts quote depends heavily on these inputs, so have them ready:

Step 4: Submit and confirm

Send the request through the site's form or contact channel, then confirm receipt and expected response timing directly with Jaco. The site does not publish response-time commitments, so treat any timeline as something to verify with the company.

Matching Your Project to the Right Service

Use the process descriptions to decide what to ask for:

• Complex, high-tolerance parts in engineering plastics → CNC machining (5-axis capability listed).
• Repeatable parts at volume → injection molding.
• Thin, flat, or insulating components → stamping/die cutting, including Nomex®, Mylar®, Kapton®, and vulcanized fiber.
• Insulation for molds and platens → the dedicated mold and platen insulation service.

Jaco lists industries including electronics, medical devices, aerospace, automotive, food and safety, healthcare and beauty, industrial equipment, and recreation and toys — useful context if you want to ask whether your sector is already served.

Common Pitfalls

• Skipping material and volume details. A quote request without these usually comes back with questions instead of a price.
• Assuming published pricing. The site shows no price list; pricing comes through the quote process.
• Using stale third-party listings. Confirm contact details on the official site before sending drawings or specifications.
• Overlooking compliance requirements. If your part is for medical, food-contact, or aerospace use, state the requirement in the first message so it is addressed in the quote.

Jaco Products is a U.S.-based precision plastic products manufacturer in Ohio, operating since 1948. It provides CNC plastic machining, plastic injection molding, plastic stamping/die cutting, mold and platen insulation, and plastic distribution. It serves buyers who need anything from prototype parts to high-volume production, including complex, high-tolerance components made from engineering plastics.

Core Services

The company describes its production range as running from prototype manufacturing to high-volume production, with strict quality control and U.S.-based manufacturing.

Capabilities and Materials

Jaco positions itself around complex parts and demanding tolerances. Its stated capabilities include machining complex parts from Delrin, nylon, Ultem, and G10/FR4, plus 5-axis CNC plastic machining.

CNC machining materials: Delrin, Nylon (6/6, 6/12), HDPE, FR-4, G-10, PEEK, Polycarbonate (Lexan), Acrylic, Ultem, UHMWPE.

Injection molding materials: ABS, Acetal (Celcon, Delrin), Nylon 6/6, glass-filled nylon, Polypropylene, HDPE, Polycarbonate, PC/ABS alloy, Ultem, PBT (Valox, Crastin), Polystyrene, thermoplastic elastomers (Isoplast, Santoprene), Acrylic.

Stamping and die-cutting materials: Nomex®, Mylar®, Polyester, Kapton®, Vulcanized Fiber.

Material choice matters because it drives both performance and manufacturability. For example, a high-temperature aerospace bracket may call for Ultem or PEEK, while a low-friction mechanical part may suit Delrin or nylon.

Industries Served

Jaco lists the following industries as users of its plastic manufacturing:

• Electronics — precision plastic components
• Medical devices — high-tolerance healthcare parts
• Aerospace — lightweight, heat-resistant solutions
• Automotive — engineered plastics for performance
• Food & safety — FDA-compliant components
• Healthcare & beauty — custom-molded plastics
• Industrial equipment — durable parts for demanding use
• Recreation & toys — tough plastics built to last

When Jaco Products Is a Good Fit

Consider Jaco Products if you need a single U.S. partner that can machine, mold, stamp, and insulate engineering plastics, especially for high-tolerance or complex parts across medical, aerospace, electronics, or industrial applications. Its stated strengths are 70+ years of experience, quick lead times, and quality control.

If your project is a simple commodity plastic part with no tolerance or material requirements, a general-purpose molder may be sufficient. Pricing is not published on the site, so cost and lead-time specifics should be confirmed through a quote request.

Evaluate Jaco Products by matching four things to your project: the process your part needs (CNC machining, injection molding, stamping/die cutting, or mold and platen insulation), the production stage you're in (prototype through high-volume), the material your design specifies, and whether your industry's tolerances and compliance needs fit the company's stated experience. Jaco Products is a U.S.-based plastic manufacturer in Ohio operating since 1948, so it is a reasonable fit when you want a domestic supplier that can machine, mold, and stamp complex, high-tolerance parts under one roof. It is a weaker fit if you need a process or material not listed on its site, or if you require published pricing before you contact anyone.

Step 1: Confirm the process matches your part

Jaco lists five service lines. Use this to decide which conversation you're actually having:

If your part is a simple flat gasket, stamping is the likely path; if it's a complex three-dimensional component with high tolerance, CNC machining or molding applies. Ask which process the supplier recommends for your drawing rather than assuming — the same part can often be made more than one way at different volumes.

Step 2: Check the material against the published list

Jaco publishes materials by process, which lets you screen your design before contacting them:

• CNC machining: Delrin, nylon (6/6, 6/12), HDPE, FR-4, G-10, PEEK, polycarbonate (Lexan), acrylic, Ultem, UHMWPE
• Injection molding: ABS, acetal (Celcon, Delrin), nylon 6/6, glass-filled nylon, polypropylene, HDPE, polycarbonate, PC/ABS alloy, Ultem, PBT (Valox, Crastin), polystyrene, thermoplastic elastomers (Isoplast, Santoprene), acrylic
• Stamping / die cutting: Nomex®, Mylar®, polyester, Kapton®, vulcanized fiber

If your print calls for a material outside these lists, that's your first question to the supplier — not an automatic disqualifier, but it needs confirmation before you invest time in a quote.

Step 3: Match the production stage

Jaco states it supports prototype manufacturing through high-volume production. That matters for two reasons:

• If you're still prototyping, you can likely get parts without committing to tooling, then transition to molding later with the same supplier.
• If you're already at volume, confirm the process you need is offered at that scale — the site presents high-volume production as a capability, but capacity and lead time for your specific part should be confirmed directly.

The company also cites quick lead times and affordable pricing as positioning. These are claims, not published figures — treat them as topics to verify in a quote rather than facts you can plan around.

Step 4: Check industry and compliance fit

Jaco lists experience across electronics, medical devices, aerospace, automotive, food and safety, healthcare and beauty, industrial equipment, and recreation and toys. The site specifically references high-tolerance medical components, lightweight, heat-resistant aerospace parts, and FDA-compliant components for food and safety applications.

Use this as a screening signal, not proof. If your project is medical or food-contact, ask directly for the specific compliance documentation your application requires — the site's mention of FDA-compliant components tells you the category is served, not which certifications or documentation you'll receive.

Step 5: Verify the credentials that matter to your buyer

The verifiable claims on the site are:

• Operating since 1948 (70+ years)
• U.S.-based manufacturing in Ohio
• Strict quality control processes (described, not specified)
• 5-axis CNC capability for complex plastic parts

For a regulated industry, "strict quality control" is a starting point. Ask what quality system is in place, how inspection is documented, and whether you'll receive material certs or first-article reports. Those answers, not the marketing line, determine whether the supplier fits a medical or aerospace program.

When Jaco Products is a good fit — and when to look elsewhere

Good fit if:

• You want a single U.S. supplier that can machine, mold, and stamp
• Your part is complex or high-tolerance and your material is on the published list
• You're moving from prototype toward production and want continuity
• Domestic manufacturing and shorter supply lines matter to your customer

Look elsewhere or dig deeper if:

• Your material isn't listed and the supplier can't confirm it
• You need published pricing or self-serve ordering before contact — the site routes you to "Contact Us" and "Request a Quote," and no pricing is posted
• Your program requires specific certifications you haven't confirmed
• You need a process outside the five listed services

Practical next step

Prepare a short package before you request a quote: a drawing or 3D model, the material and tolerance callouts, your expected annual volume, your target production stage (prototype vs. production), and any compliance documentation your industry requires. That lets the supplier respond on process, material, and lead time in one pass — and lets you compare its answer against the criteria above rather than against a general sales pitch.