Website review
This review may include AI-generated content and is not individually verified. Domain, certificate and other facts come from the observed data on this page.
What is Center of My Screen + Online Ruler App?
Center of My Screen + Online Ruler App is a browser tool that marks the exact physical middle of your display, both at the center point and along the edges. It also includes a true-scale on-screen ruler you calibrate by entering your screen's diagonal size. The page describes it as "minimalist, installable," meaning it can run as a web app and be added to your device for quick access.
What you can do with it
- Find screen center: Overlay a marker at the midpoint to align a webcam, microphone, or monitor so your face or subject sits centered in frame.
- Align equipment: Use the edge markers to position webcams, boom arms, or secondary displays evenly.
- Measure on screen: After entering your diagonal screen size, the ruler displays at 1:1 scale for quick, real-world measurements of small objects held against the display.
- Calibrate a gaming aim dot: The page mentions using the center marker to calibrate an aim dot for competitive gaming.
- Handle multiple displays: A "Second Window" button lets you open the tool in another window, useful for marking the center of a second monitor or a different section of a large screen.
When it's a good fit
This suits people doing desk setup work — streamers centering a camera, remote workers aligning a webcam with their eyeline, or anyone who needs a rough on-screen ruler without hunting for a physical one. It is less suited to precise engineering measurement, since ruler accuracy depends on entering the correct diagonal size and on your display's actual pixel geometry.
A practical next step
Open the app, enter your monitor's diagonal size to calibrate the ruler, then drag the browser into fullscreen so the center marker lines up with your screen's true midpoint. If you use two monitors, click "Second Window" and move that window to the other display before aligning your hardware.
How can I use the online ruler to get an actual 1:1 size on my screen?
To get a true 1:1 ruler, the app needs to know your screen's physical size. On Center of My Screen + Online Ruler App, open the Ruler App section and enter your screen's diagonal measurement (in inches or cm). The page then scales the on-screen ruler to match that physical dimension, so a line marked "1 inch" measures an actual inch on your display.
How to find your diagonal size
- Check the model number on the monitor or laptop and look up its spec sheet.
- Measure the visible diagonal yourself with a tape measure, corner to corner of the lit area (exclude the bezel).
- If you use a scaled resolution or OS zoom, set scaling to 100% first, or the ruler will be off.
Practical uses
- Aligning a webcam or microphone to the physical center of your screen.
- Checking whether a printed document or photo will match its on-screen preview size.
- Calibrating an aim dot or crosshair position in games, where a consistent reference point matters.
- Verifying that a small object (a card, a coin, a component) matches an expected dimension before you order or fit it.
Trade-offs and limits
- Accuracy depends entirely on the diagonal value you enter; a wrong number gives a wrong ruler.
- Browser zoom, OS display scaling, and non-native resolutions all distort the result.
- Very large or very small screens may be harder to measure precisely.
A useful next step Measure your screen's diagonal now, enter it in the ruler, then hold a credit card or ruler against the on-screen marks to confirm they match. If they don't, adjust the diagonal value slightly until they do. For multi-monitor setups, use the "Second Window" option to place a ruler or center marker on each display at once.
What steps should I follow to align my webcam using the screen center tool?
Open Center of My Screen + Online Ruler App in your browser, click Go Fullscreen, and use the on-screen center marker to line up your webcam so it sits at the horizontal and vertical midpoint of your display.
A practical alignment sequence
- Set up the display you'll actually use. If you work across two monitors, keep the tool on your primary screen and use the Second Window button to mark the other screen or a section of it.
- Go fullscreen. This removes browser chrome so the center marker matches the true center of the panel, not the center of a smaller window.
- Position the webcam. Sit where you normally sit, then move the camera until its lens is centered on the marker. Small shifts matter more than they look: a lens a few centimeters off-center produces a noticeably angled view.
- Check your framing, not just the lens. Open your camera preview (or a video-call test screen) and confirm your face lands in the middle of the frame with balanced space on both sides.
- Test audio separately. The page includes a Test Microphones option, which is worth using because microphone placement and camera placement are different problems — a centered camera can still pick up uneven or hollow sound.
- Lock the position and re-check. Tighten the mount, then confirm the marker still lines up with the lens. Mounts often drift slightly when you tighten them.
Choosing between the two tools
| Goal | Use | Why |
|---|---|---|
| Center a webcam or monitor-mounted device | Screen center marker | Gives a physical reference point on the glass |
| Measure the gap between camera and screen edge | Ruler app | Displays a true-scale ruler once you enter your diagonal screen size |
| Align gear across two displays | Second Window | Marks more than one screen or screen region at once |
When the ruler is the better choice
If your goal is symmetry rather than a single center point — for example, placing a webcam exactly between two side speakers, or checking that a monitor arm sits evenly — switch to the Ruler App. You enter your screen's diagonal size and it draws a ruler at true scale, so you can measure offsets directly instead of eyeballing them. Enter the size in inches or centimeters, whichever matches your tape measure, to avoid conversion mistakes.
A useful next step: after aligning the camera, take a screenshot of your own video preview and check whether your eyes sit near the vertical center of the frame. Many people center the camera perfectly but still appear off-axis because their chair height, not the camera, is the real variable.
How do I calibrate an aim dot for gaming with this app?
Open Center of My Screen + Online Ruler App in your browser, click Go Fullscreen, and the app marks the physical center of the display. In most games the aim dot sits at the exact screen center, so the marker shows you where to place it. If your game lets you offset the crosshair, adjust the offset until the dot lines up with the center marker.
For a true-scale ruler overlay, enter your diagonal screen size in the Ruler App section, then use it to measure the distance from the center marker to the dot or to check spacing between on-screen elements. The app notes you can enter the size in inches, cm or parsecs, so match the unit your display spec uses. The Second Window button supports multiple screens, useful if you game on one monitor and keep the marker on another.
A practical workflow:
- Set your display to the resolution and aspect ratio you play at.
- Fullscreen the app and note where the center marker falls.
- Launch your game and, if it supports a custom crosshair, align the dot to that point.
- Use the ruler to verify distances if you are matching a physical reference.
Keep in mind this is a browser tool for visual alignment, not a game overlay, so you will typically note the position, then switch to your game. For most players the center of the screen is the correct aim point; only games with offset or custom crosshair systems need the extra ruler step.
Can I find the center of multiple screens or sections at the same time?
Yes. The site supports a "Second Window" button specifically for finding the center of multiple screens or separate sections of a screen at the same time. You open the tool in one window, use Second Window to launch another instance, and move each window onto the display or area you want to mark. Each window then shows its own center cross, so you can line up two monitors, one monitor plus a laptop panel, or two regions of an ultrawide display without doing the math yourself.
The practical setup looks like this:
- Open the tool on the first screen and press Second Window.
- Drag the new window to the second screen or the section you want to measure.
- Go fullscreen in each window so the center marker matches the actual panel edges rather than the window frame.
- Align your webcam, microphone stand, or aim dot to the cross in each window.
A few things to keep in mind. Fullscreen matters because a floating window's center is the center of the window, not the screen. On Windows, dragging a window to the edge and letting it snap can also shift the apparent center, so verify against the physical bezel. If your two screens differ in resolution or size, each window still finds its own screen's center independently, which is exactly what you want for aligning equipment across mismatched displays.
For a single screen with distinct zones, such as a wide monitor you treat as two halves for a camera and a light, the same Second Window approach works; just size and position each window over the half you care about. For true scale measurements rather than centering, the site's ruler feature needs your diagonal screen size entered in inches or centimeters, and it is a separate function from the center markers.
Next step: if you are calibrating aim in a game, center the marker first, note the position, then switch to your game and match your crosshair to that spot. If you are mounting a webcam, run both windows at once, one per screen, and adjust the camera until it sits on the cross in the window covering that display.
What screen size input does the ruler app accept for true-scale display?
The ruler app accepts a diagonal screen size as its input, and you can enter it in whatever unit you prefer — inches, centimetres, or even parsecs, per the page's own wording. The number you type is treated as the diagonal measurement, which the app then uses to render a ruler at true 1:1 scale on your display.
How to use that
- Look up your display's official diagonal size (it's usually in the model name or spec sheet, e.g. a 27-inch monitor).
- Open the ruler tool on the same screen you want to measure against.
- Enter the diagonal figure, then compare an on-screen object — a credit card works well, since it's a standard 85.60 × 53.98 mm — against the ruler to sanity-check the scale.
Practical notes
- Match the input to the screen you're actually viewing. If you have a laptop plus an external monitor, the correct diagonal differs for each, so re-enter the value when you switch displays.
- Browser zoom and OS display scaling can throw off true scale. Reset zoom to 100% before trusting the ruler.
- The page also offers a "Second Window" button for handling multiple screens or screen sections at once, which is handy if you're aligning a webcam or setting up an aim dot across displays.
For a physical cross-check, a bank card or a sheet of A4 paper gives you a known dimension to verify against.
User reviews (0)