Website review
This review may include AI-generated content and is not individually verified. Domain, certificate and other facts come from the observed data on this page.
What is Melev's Reef?
Melev's Reef is a long-running personal saltwater-reefing site, built around the hobbyist known as Melev. It mixes a blog, a library of how-to articles, and identification guides, with a strong emphasis on practical reefkeeping rather than glossy product marketing.
What you'll find there
- ReefBlog — dated posts on tank experiences and observations, such as alkalinity wandering, power consumption, and coral identification.
- Articles — hands-on guidance, for example testing for stray electricity, what SPS corals need, and changing an RO membrane.
- Creature ID — categories covering algae and plants, anemones, crustaceans and molluscs, fish, invertebrates, LPS and SPS corals, pests, pods and snails, soft corals, worms, cucumbers and starfish, and zoanthids and palys.
- Pest control — a section specifically about dealing with reef pests.
- Community — a Facebook group described as a place where helpful people assist, with a stated rule of treating others with kindness.
- App — the site points to a "Reeftrace" app.
Who it suits
It's most useful for someone setting up or maintaining a saltwater tank who wants plain-spoken, experience-based answers: how to diagnose a problem, identify a hitchhiker, or carry out maintenance. The creature-ID section is handy when something unexpected appears on live rock, and the articles work well as a reference you return to rather than read start to finish.
A reasonable next step: if you have a specific issue, start with the Articles list, then use Creature ID to confirm what you're looking at before deciding on treatment. If your question is more conversational, the Facebook group is the natural place to ask.
How do I get started with a saltwater aquarium?
Melev's Reef is aimed at hobbyists who want to keep a saltwater or reef tank, with a strong focus on livestock identification and practical maintenance articles. It is not a storefront-first site: the value is in the reference material and community help, so treat it as a learning and troubleshooting resource rather than a place to buy a starter kit.
A sensible first-tank path
- Decide what kind of tank you actually want. A fish-only system is more forgiving; a reef tank with corals adds lighting, flow and water-chemistry demands. Melev's Reef splits its creature identification into categories such as fish, anemones, crustaceans and molluscs, soft corals, LPS corals, SPS corals, zoanthids and palys, which is a useful reminder of how much variety you are signing up for.
- Learn the basic maintenance tasks before you buy livestock. The site's article list covers hands-on jobs such as testing for stray electricity and changing an RO membrane. Those are the kinds of chores that separate a tank that survives from one that thrives.
- Use identification pages when you are unsure what you have. Algae, pests, worms, pods and snails all have their own sections. Newcomers often panic over harmless hitchhikers, so identifying first avoids unnecessary treatment.
- Get a second opinion from other hobbyists. Melev's Reef points to a Facebook group where members are asked to treat each other with kindness. That is useful when you have a photo of something unusual and need a quick sanity check.
What to expect from the site
The content is a mix of blog posts, longer articles and creature references. Recent blog topics include wandering alkalinity, reef power consumption and a coral that looks like a Fungia but is not one. These are the concerns of someone already running a tank, so a beginner should read the introductory material first and use the rest as a reference library.
For a concrete example: if you set up a tank and later notice a small, unfamiliar worm or a patch of algae, you can look it up in the creature ID sections before deciding whether to remove it. If you cannot find a match, the community group is the next step.
Where to look next
- Start with the "New to Saltwater" area and the article index, then read the creature ID sections for the groups you plan to keep.
- If you want a structured beginner course rather than browsing articles, Reef2Reef has active beginner forums, and Reef Builders covers equipment and livestock news.
- For water-chemistry questions in particular, cross-check what you read against a second source before changing dosing; a single blog post rarely covers every tank's situation.
The main trade-off: Melev's Reef gives you depth and hobbyist experience, but you will need to assemble your own beginner plan from scattered articles rather than follow one guided setup.
What should I do if I find a pest in my reef tank?
First, don't panic and don't start pulling rocks out. Identify what you're actually looking at, then decide whether it needs action at all. Many things reefkeepers call "pests" — bristleworms, small amphipods, harmless flatworms, asterina stars — are scavengers that cause no real harm. The genuinely problematic ones (Aiptasia and majano anemones, red planaria flatworms, montipora-eating nudibranchs, acro-eating flatworms, vermetid snails, gorilla crabs, sundial snails) spread or damage corals, so they need a response.
A practical sequence
- Photograph it — top-down and close-up, with a scale reference if possible. Identification drives everything else.
- Confirm it's on the coral or just nearby. A pest sitting on the glass is a different problem from one eating tissue.
- Isolate if you can. Dip new corals before they go in the display; that single habit prevents most infestations.
- Match the remedy to the animal, not to a general "pest" label.
| Situation | Typical approach | Trade-off |
|---|---|---|
| A few Aiptasia or majano | Manual removal, kalk paste, or a commercial treatment applied directly | Repeated sessions; some treatments affect nearby tissue |
| Widespread Aiptasia | Natural predator such as peppermint shrimp or a copperband butterfly | Predators are hit-or-miss and may nip other corals |
| Flatworms (red planaria) | Siphon out during water changes; treat only if numbers explode | Treatments can cause mass die-off and oxygen crash |
| Nudibranchs on SPS or montipora | Inspect and remove; consider dipping affected colonies | Eggs survive dips; you must repeat |
| Gorilla or other nuisance crabs | Trap or remove the rock and extract | Rock removal disrupts the aquascape |
| Vermetid snails | Reduce suspended food, crush or cover tubes | Hard to eliminate completely |
Melev's Reef is a long-running hobby site with a creature-identification section covering algae, anemones, crustaceans and molluscs, fish, invertebrates, LPS, SPS, soft corals, zoanthids, pests, and a dedicated pest-control area — useful when you have a photo and no name for it. The site also hosts a Facebook group for pest-control questions, where members follow a stated rule of treating each other with kindness; that's a reasonable place to post a clear photo and ask for a second opinion. You can start at Melev's Reef.
If you only do one thing: before treating anything, get a positive ID and check whether the animal is actually damaging a coral. Treating a harmless scavenger costs you time, money and possibly a tank-wide die-off, while treating the wrong pest lets the real one keep spreading.
A concrete scenario: you spot a cluster of small brown anemones at the base of a zoanthid colony. Photograph them, confirm Aiptasia, then treat just that cluster rather than dosing the whole tank — the zoanthids nearby are the constraint, so localized treatment limits collateral damage. Recheck in a week, since survivors regrow from tissue left behind.
How can I test for stray electricity in my aquarium?
Melev's Reef addresses this directly in its article "How to Test for Stray Electricity," which is the most relevant starting point for a saltwater keeper who feels a tingle when touching the water or equipment. The site is organized around practical reefkeeping: creature identification, pest control, an article archive, and a blog covering topics such as alkalinity swings and reef power consumption. The stray-electricity piece sits in that how-to article section rather than in a product review area, so expect a procedural walkthrough rather than equipment sales.
What the test involves
Stray voltage in an aquarium usually comes from a failing pump, heater, powerhead or light that leaks current into the water. A basic check uses a multimeter set to AC voltage: one probe in the tank water, the other to a known ground such as a grounded outlet screw or a grounding probe. A reading near zero suggests no significant leak; a substantial reading indicates something is putting voltage into the water. A more meaningful test is measuring current, not just voltage, because a voltage reading on a high-impedance meter can be misleading.
Practical steps
- Unplug equipment one piece at a time and re-measure. When the reading drops, you have found the culprit.
- Inspect cords, heaters and pump seals for cracks, salt creep or corrosion.
- Consider a grounding probe or GFCI outlet as protection, but treat these as safety measures, not repairs.
- Never work in the tank with wet hands and live equipment if you suspect a serious fault.
Who this is for
This matters most to anyone running multiple pumps and heaters in a sump, where a single failing device can energize the whole system. Newcomers often discover the issue after a mild shock; experienced keepers test periodically as part of maintenance. For broader reefkeeping context, Reef2Reef and Reef Builders cover equipment safety discussions, while Melev's Reef is where the specific how-to lives.
Next step
Read the full article on Melev's Reef, then buy or borrow a multimeter and run the unplug-one-device-at-a-time test before adding any new livestock or reaching into the tank.
What are the care requirements for SPS corals?
SPS (small polyp stony) corals are the more demanding side of reefkeeping: they reward stability and good water quality, and punish neglect quickly. Melev's Reef includes a dedicated article on this topic, "What do SPS need? This is what you need to read," suggesting the site treats it as a core beginner-to-intermediate subject. The general requirements below are standard reefkeeping advice; check the site's article for the specifics it recommends.
Core requirements
- Lighting: Strong, consistent intensity. Many SPS keepers use high-output LED, T5 or metal halide systems. Acclimating new frags to lower light and raising them gradually avoids bleaching.
- Water flow: Random, indirect, brisk flow. SPS grow best where flow carries waste away and delivers nutrients; direct blasting from one pump can strip tissue.
- Water chemistry stability: The key variable is steadiness, not a single "perfect" number. Alkalinity, calcium and magnesium should stay within tight ranges, and alkalinity swings are a common cause of tissue loss. The Melev's Reef blog post "Wandering alkalinity" reflects how much attention this parameter gets.
- Nutrients: Very low but not zero. Phosphate and nitrate should be measurable yet low; zero nutrients can starve corals and invite pests or algae imbalance.
- Temperature and salinity: Stable, typical reef ranges, checked with reliable instruments. Stray voltage and equipment faults are worth ruling out; the site has an article on testing for stray electricity, which matters for pumps and heaters in SPS systems.
- Placement and spacing: Give colonies room to grow and avoid shading neighbours. Mount frags securely so flow and snails do not knock them loose.
Practical comparison
| Factor | Why it matters for SPS | Common failure |
|---|---|---|
| Alkalinity | Builds skeleton; swings stress tissue | Dosing by hand irregularly |
| Flow | Removes waste, feeds polyps | One-directional blasting |
| Light | Fuels growth and colour | Moving frags straight to full intensity |
| Nutrients | Too high fuels algae; too low starves | Chasing zero phosphate |
A realistic starting scenario
If you are new to saltwater, the site's "NEW TO SALTWATER" section and creature ID pages are a sensible first stop before buying SPS frags. A practical path: run a stable tank for several months with soft corals or LPS, confirm your alkalinity holds steady between water changes, then add one or two hardy SPS frags and observe for a few weeks before adding more. For identification and pest questions, the site's creature categories (SPS Corals, Pests, Algae & Plants) help you match what you see.
For community troubleshooting, Melev's Reef points to a Facebook group where members follow a kindness rule; local reef clubs and forums can serve the same role. If you want broader reference material, Reef2Reef and Reef Builders are established reefkeeping sites.
Next step: read the site's SPS article, then test alkalinity, calcium, magnesium, nitrate and phosphate on the same day each week for a month. If those numbers drift between tests, fix stability before buying more corals.
How do I change the RO membrane in my reverse osmosis system?
For a step-by-step walkthrough, the most direct answer is Melev's Reef article "How to change a RO membrane," linked from the site's articles index. The general procedure below applies to most household reverse osmosis units; confirm the specifics against your own system's manual, since housings and fittings vary.
Melev's Reef
The general process
- Shut off the water supply to the RO unit and close the storage tank valve. Open the faucet to release pressure.
- Note how the tubing is connected before removing anything — photograph the membrane housing cap and its lines. Misrouted tubing is the most common cause of a unit that runs but produces nothing.
- Remove the membrane housing cap. Most are twist-off; some need a wrench. Expect water to spill, so work over a towel or bucket.
- Pull the old membrane out with pliers gripping the central tube. It usually comes out with resistance and may smell or look discolored.
- Insert the new membrane in the same orientation as the old one — the end with the two small O-rings goes into the housing first, seating toward the far end. Lubricate the O-rings with a food-grade silicone or the lubricant supplied with the membrane.
- Replace the housing O-ring if one came with the kit, then reinstall and tighten the cap by hand.
- Flush the new membrane by running the unit to drain for a period before collecting product water. New membranes contain a preservative that should not go into your tank.
- Reconnect and check for leaks over the next few hours, then test product water with a TDS meter and compare against your tap water. A working membrane should reject the large majority of dissolved solids.
Practical decisions
- When to change it: Base this on measured rejection rate and production speed, not a calendar. If product TDS climbs toward a fraction of your tap TDS, or output slows noticeably after you have already replaced prefilters, the membrane is the likely cause.
- Change prefilters first. Sediment and carbon cartridges protect the membrane. Replacing the membrane while leaving exhausted prefilters in place shortens the new membrane's life.
- Keep the old membrane briefly. If the new one underperforms, reinstalling the old one helps you tell a membrane problem from a housing, flow-restrictor or pressure problem.
If you keep a reef tank, the same site's beginner and creature-identification sections are useful context for how top-off and mixing water quality affect livestock.
Melev's Reef
User reviews (0)