Website review
This review may include AI-generated content and is not individually verified. Domain, certificate and other facts come from the observed data on this page.
What is MVA Scientific Consultants?
MVA Scientific Consultants is a full-service microscopy and materials-analysis laboratory based in Duluth, Georgia, operating since 1990. It provides customized analytical testing and reporting for industry, rather than routine consumer testing. Its stated focus is reliable, reproducible data, and it serves quality managers, R&D scientists, EHS specialists, investigators and engineers.
Its work falls into two broad groups: identifying what a material is, and explaining why it failed or caused a problem.
Typical services
- Particle characterization and material analysis
- Contamination identification and failure analysis
- Stack sample analysis and asbestos services
- Glass delamination analysis
- Patent infringement analysis and litigation support
Industries and applications
- Environmental forensics and industrial hygiene
- Nanomaterials analysis
- Pharmaceutical and biomedical testing
- Consumer goods manufacturing
- Research and development support
Techniques used
- Scanning and transmission electron microscopy
- Energy dispersive X-ray spectrometry
- Optical light microscopy
- Confocal Raman microscopy and Fourier transform infrared spectroscopy
- Surface profilometry and sample preparation
The laboratory holds ISO/IEC 17025 accreditation, is cGMP compliant, FDA registered, DEA licensed and SBA WOSB certified, and uses published ASTM, NIOSH and EPA methods. It also states a strict confidentiality policy for client project information.
A practical next step: if you have a specific unknown particle, contaminant or failed part, check the case studies and methods pages at MVA Scientific Consultants to see whether a comparable problem has been handled before. If your work is regulated — pharmaceutical, environmental or litigation-related — confirm the relevant accreditation and reporting format before sending samples, since those requirements often determine whether a laboratory is suitable.
What types of analytical testing services does MVA Scientific Consultants offer?
MVA Scientific Consultants is a full-service microscopy and materials-analysis laboratory. Its services center on identifying what a material is, where contamination or failure came from, and whether a product meets a specification. The work is customized rather than a fixed menu, so the scope of a project is usually defined around the client's specific sample and question.
Core service areas
- Particle characterization — size, shape, morphology and composition of particles, including nanomaterials.
- Material analysis — identification and structural evaluation of metals, polymers, coatings, minerals and other materials.
- Contamination identification — tracing unknown residues, fibers, particles or deposits to their source.
- Failure analysis — investigating why a component, product or process failed.
- Stack sample analysis — examining collected air-emission samples, typically for environmental compliance.
- Glass delamination analysis — a specialized pharmaceutical concern involving glass containers.
- Asbestos services — testing and related support for asbestos-containing materials.
- Litigation and patent support — analytical work and expert reporting for disputes, including patent infringement matters.
Methods behind those services
The laboratory's toolkit includes scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectrometry (EDS), optical light microscopy, confocal Raman microscopy, Fourier transform infrared spectroscopy (FTIR), surface profilometry and sample preparation. In practice, these are often combined: microscopy shows the physical form, while spectroscopy or EDS identifies the chemistry.
Who tends to use it
Quality managers, R&D scientists, EHS specialists, investigators and engineers are named as typical clients, spanning environmental forensics, industrial hygiene, pharmaceuticals and biomedical testing, consumer goods manufacturing, nanomaterials, and general research and development. If your question is "what is this particle, and is it a problem," this is the kind of lab that answers it.
A practical next step
Before contacting any analytical lab, write down three things: what the sample is, what question you need answered, and what decision the result will drive (a batch release, a supplier claim, a regulatory filing or a legal case). That framing determines which technique is appropriate and prevents paying for tests that do not address your actual problem. For regulated work, confirm the lab's accreditation scope covers your specific method; MVA states ISO/IEC 17025 accreditation along with cGMP compliance and FDA registration. You can review its stated capabilities at MVA Scientific Consultants.
How can I submit samples to MVA Scientific Consultants for analysis?
MVA Scientific Consultants accepts samples for customized analytical testing at its Duluth, Georgia laboratory. The site lists a Chain of Custody Form under its main navigation, which is the standard document used to submit samples: it records who is sending the material, what tests are requested, and how results should be returned. Contact the lab before shipping anything, since sample preparation and container requirements vary by method (for example, microscopy, spectroscopy, or asbestos analysis).
Practical submission steps
- Identify your goal and likely method — contamination identification, failure analysis, particle characterization, asbestos, pharmaceutical testing, and others are listed as services.
- Contact the lab at 770-662-8509 or [email protected] to confirm the appropriate test, sample size, and shipping instructions.
- Complete the Chain of Custody Form and include it with the shipment.
- Ship to 3300 Breckinridge Blvd., Suite 400, Duluth, GA 30096, following any labeling or preservation guidance the lab provides.
Whose experience this reflects
The page itself does not include client reviews or video walkthroughs of the submission process, so no outside observer's experience is available here. In practice, first-time submitters often lose time by sending samples before confirming method suitability; a short call or email prevents that.
Decision criterion
If your material is hazardous, temperature-sensitive, or part of litigation, ask about chain-of-custody handling and turnaround before shipping. The lab states it is ISO/IEC 17025 accredited, cGMP compliant, FDA registered, and DEA licensed, and maintains a strict confidentiality policy — relevant if your project involves proprietary formulations or regulatory review.
Next step
Download or request the Chain of Custody Form, then call the lab to confirm the correct test and shipping method for your specific sample.
What industries does MVA Scientific Consultants serve?
MVA Scientific Consultants serves a broad range of industries through customized analytical testing, with a focus on materials characterization, contamination identification and failure analysis. Its stated industry and application areas are:
- Environmental forensics
- Industrial hygiene testing
- Nanomaterials analysis
- Pharmaceutical and biomedical testing
- Consumer goods manufacturing
- Research and development support
It also lists application-specific services that cut across sectors, including particle characterization, material analysis, stack sample analysis, contamination identification, failure analysis, glass delamination analysis, patent infringement analysis, litigation support and asbestos services.
The common thread is problem-solving for quality managers, R&D scientists, EHS specialists, investigators and engineers who need microscopy and spectroscopy data rather than routine pass/fail testing. For example, a manufacturer facing unexplained particle contamination, or a pharmaceutical team investigating glass delamination, would fit the laboratory's stated strengths more closely than a company seeking simple, high-volume materials certification.
A useful next step is to match your sample type and question to the "Methods & Techniques" list — such as scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectrometry, confocal Raman microscopy or Fourier transform infrared spectroscopy — then confirm with the lab which method suits your matrix and reporting needs.
What accreditations and certifications does MVA Scientific Consultants hold?
MVA Scientific Consultants holds the following accreditations and certifications, as stated on its site:
- ISO/IEC 17025 accredited — certificate no. 2096.01
- cGMP compliant
- FDA registered
- DEA licensed
- SBA WOSB certified (Women-Owned Small Business)
It also states that it uses standard methods published by organizations such as ASTM, NIOSH and EPA.
What these mean in practice
- ISO/IEC 17025 is the key one for analytical testing: it signals a laboratory has been assessed for competence to produce valid, traceable results. If your project may end up in a regulatory submission, litigation or a customer audit, this is usually the first credential to verify.
- cGMP compliance and FDA registration matter most for pharmaceutical, biomedical and consumer-product work where data may support a filing or a quality record.
- DEA licensing is relevant only for work involving controlled substances; it is not a general quality credential.
- SBA WOSB certification can matter for government contracting or supplier-diversity goals rather than for technical data quality.
Next step
Match the credential to your purpose before engaging the lab: ask for the current ISO/IEC 17025 scope document and confirm that the specific test method you need is listed within it. If your work is pharma-related, also ask how cGMP compliance is documented for the type of report you require.
How does MVA Scientific Consultants ensure client confidentiality?
MVA Scientific Consultants states that it maintains a strict proprietary information policy: project information is not released to any third parties unless the submitter authorizes it or state or federal law requires it. That is the core confidentiality commitment described on its site. The lab also notes that it handles sensitive work such as litigation support, patent infringement analysis, contamination identification, and failure analysis, where discretion about client identity and findings often matters as much as the analytical result.
For practical purposes, confidentiality here is a policy commitment rather than a technical guarantee, so the useful step is to confirm the specifics before sending samples:
- Ask whether a formal non-disclosure agreement can be signed, and whether it covers subcontractors or couriers.
- Clarify how reports and raw data are stored, who inside the lab can see them, and how long they are retained.
- Confirm whether results can be shared with a third party only on written instruction from you.
- For regulated work, ask how confidentiality interacts with accreditation, cGMP, FDA, or DEA obligations, since those can create disclosure duties.
A concrete scenario: a manufacturer suspecting a supplier contamination issue may want the lab to test samples without alerting the supplier. The published policy supports that intent, but the manufacturer should still put the expectation in writing and designate exactly who may receive the report.
If confidentiality is central to your project, the next step is to contact the lab directly and request its confidentiality terms or NDA process before shipping materials. You can reach it through its site, MVA Scientific Consultants, or by phone at the number listed there.
User reviews (0)