Website review
This review may include AI-generated content and is not individually verified. Domain, certificate and other facts come from the observed data on this page.
What is RadioReference.com?
RadioReference.com is a large reference database for radio communications, built around identified frequencies and trunked radio systems that you can browse by state, metro area or ZIP code. It combines that database with community forums, a wiki, live audio feeds and premium tools for scanner users, radio hobbyists and professionals.
Its main draw is breadth and organization: instead of hunting scattered lists, you get one place to look up what a frequency or system is used for and who maintains the record. RadioReference describes the database as contributor-submitted and volunteer-administered, with 226K+ identified frequencies and 7,400+ trunked radio systems listed.
What you can do
- Search the database by location or system type.
- Discuss radio topics in the forums.
- Read subscriber-written articles in the wiki.
- Listen to live public-safety and scanner audio through Broadcastify.
- Use premium tools such as programming downloads, watch lists and ad-free browsing.
Free vs. premium
| Area | Free account | Premium |
|---|---|---|
| Database browsing | Yes | Yes |
| Forums and wiki | Yes | Yes |
| Ad-free browsing | No | Yes |
| Broadcastify archives | No | Yes |
| Programming downloads | No | Yes |
| Watch lists | No | Yes |
Premium is listed at $15 for 6 months, $30 for 1 year and $60 for 2 years, with the same $2.50/month equivalent. Subscriptions are non-refundable and work across RadioReference and Broadcastify.
Who it suits
- Scanner listeners who want to program a radio for a local area.
- Radio professionals and volunteers who need to identify a frequency or system.
- Researchers and journalists checking communications references.
- Hobbyists who want forums, wiki articles and live feeds in one network.
If you are new, start with the database search for your ZIP code or metro area, then decide whether the archive and programming features justify premium. Related sites include Broadcastify for live audio and Incident Source for incident alerts.
How can I find radio frequencies for my local area?
Use RadioReference.com as a lookup directory first, then verify what you find against a live source before you rely on it.
Start with a location search. RadioReference organizes its frequency and trunked-system data so you can browse by state, metro area, or ZIP code. That is the fastest route for a local question: enter your ZIP, look at the county and metro listings, and note both conventional frequencies and any trunked systems that cover your area.
What you will typically see
- Conventional channels: a single frequency with a label and often a tone (CTCSS/DCS) requirement.
- Trunked systems: a set of control channels plus talkgroups. You program the system, not just one frequency.
- Site or agency names, which tell you whether the listing is city, county, or statewide.
Then match the data to your radio. Conventional-only scanners cannot follow a trunked system, and digital systems need a digital-capable receiver. If your area uses a trunked system, check the system type and talkgroup list before buying or programming anything.
A practical scenario. You want your county's fire dispatch and a nearby city's police. Search your ZIP, open the county page, copy the conventional entries into your scanner software, then open the trunked system page for the city and program the control channels and the talkgroups you care about. Listen for a while and confirm the labels match what you actually hear.
Verify before trusting. Listings are community-submitted and can go stale after agencies reband, change talkgroups, or encrypt. Cross-check with a live feed, a local scanner forum thread, or your own reception. Treat any single entry as a lead, not a fact.
Next step: search your ZIP on RadioReference.com, open the county and any statewide trunked system, and write down the system type. That one detail determines what equipment and software you need.
What features do I get with a RadioReference premium subscription?
A RadioReference premium subscription unlocks the site's deeper tools rather than just the public frequency listings. One subscription covers both RadioReference and its sister service Broadcastify, so the same payment applies across the network.
What premium adds
- Ad-free browsing across the RadioReference network.
- Full Broadcastify live audio archives, letting you go back and listen to past feeds rather than only live streams.
- Radio programming downloads compatible with software such as CHIRP and ProScan, so you can pull frequency data into a scanner.
- Personalized watch lists through MyRR and My Broadcastify.
- Additional benefits are listed on the site's full premium page.
Plans and pricing
| Term | Price | Equivalent |
|---|---|---|
| 6 months | $15 | $2.50/month |
| 1 year | $30 | $2.50/month |
| 2 years | $60 | $2.50/month |
The 1-year plan is marked "Most Popular." Subscriptions are non-refundable, and the site reports 74,303 current premium subscribers.
Who benefits most
If you only look up an occasional frequency, the free database is probably enough. Premium makes sense if you program scanners regularly, want to review past Broadcastify audio, or want watch lists and an ad-free experience. A scanner hobbyist who programs several radios would likely get the most value from the programming downloads and archives, while a casual listener might prefer the free tier.
Next step: Compare the free database against the premium feature list to see whether ad-free browsing and archive access matter for your use, then choose the term that matches how long you expect to stay active in the hobby.
How do I program my scanner using RadioReference data?
RadioReference is best used as a lookup and download source, not as a programming tool itself. You find the frequencies or trunked system for your area, then either enter them into your scanner manually or export them in a format your programming software can read. The site's own description notes that premium access includes "radio programming downloads (CHIRP, ProScan & more)," so the intended workflow is: identify the system, then feed it to software rather than typing everything by hand.
A practical workflow
- Identify your location and system. Use the database search by state, metro area or ZIP code. For conventional frequencies, note the frequency, mode (FM, NFM, digital) and any tone (CTCSS/DCS). For trunked systems, note the system type, control channels and talkgroup IDs.
- Check the system type carefully. Trunked systems require the scanner to support that specific protocol, and you program talkgroups rather than individual frequencies. Conventional systems are simpler but may still need tone squelch to avoid hearing unrelated traffic.
- Get the data into your scanner. Either enter it manually through the keypad, or use programming software. RadioReference's premium tier advertises downloads compatible with CHIRP, ProScan and similar tools; free accounts can still read the database pages and copy values by hand.
- Verify and refine. Scan for a while, confirm you are hearing the intended agency, and adjust lockouts or scan lists as needed.
Manual vs. software programming
| Approach | Best for | Trade-off |
|---|---|---|
| Manual keypad entry | A few conventional channels, quick tests | Slow and error-prone for large trunked systems |
| Software with database import | Whole counties, trunked systems, many talkgroups | Needs a compatible scanner, cable and often a paid data subscription |
A concrete example
Suppose you want your local police and fire dispatch. Search your ZIP code in the database, open the county page, and note whether the agencies sit under a conventional list or a trunked system. If it is trunked, write down the control channels and the talkgroup IDs for police and fire dispatch. If you use CHIRP or ProScan, import that system directly; otherwise enter the control channels first, then the talkgroups, and label each one so you can identify it later.
Next step
Create a free account to browse and save your area, then decide whether the premium download features are worth it for your scanner model. If you only monitor one or two conventional channels, manual entry is fine. If you want a full trunked system with dozens of talkgroups, the software route saves substantial time. Before buying anything, confirm your scanner supports the system type you found.
What is the difference between RadioReference and Broadcastify?
RadioReference is the reference library; Broadcastify is the listening platform. Both sit under the same network, and one Premium subscription covers both, but they answer different questions.
RadioReference is where you look up what exists and what it is used for: identified frequencies, trunked radio systems, and FCC license data, browsable by state, metro area or ZIP code, plus forums and a wiki. It is a research and programming tool — you go there to find out which frequencies a local system uses, then load them into a scanner or radio.
Broadcastify is where you listen rather than program. It hosts live public-safety and scanner audio feeds from thousands of sources, with browse options such as near-me, top feeds, new feeds and alert feeds. You do not need a scanner or an antenna; you need a browser or app and an internet connection.
| RadioReference | Broadcastify | |
|---|---|---|
| Primary use | Look up frequencies, trunked systems, licenses | Listen to live audio feeds |
| Typical output | Data you program into your own radio | Streaming audio |
| Best for | Scanner owners, radio professionals, researchers | Listeners without equipment, or checking an area remotely |
| Community side | Forums and wiki | Feeds contributed by stream providers |
Which one you want depends on the job. If you own a scanner and want to load your local system correctly, start with RadioReference. If you just want to hear what is happening in a city you are visiting, or you have no radio equipment at all, start with Broadcastify. Many people use both: look up the system on RadioReference, then listen on Broadcastify to confirm it is active before spending time programming.
A practical example: someone moving to a new metro area can browse RadioReference for the trunked systems covering that area, then open Broadcastify to sample the feeds and decide whether the traffic they care about is worth buying a scanner for.
Premium is the shared upgrade path — the page describes one subscription working across both sites, adding archives, programming downloads, watch lists and ad-free browsing. Check the current plan details on RadioReference.com before subscribing, since the listed terms are non-refundable.
How can I contribute frequencies or radio system information to the database?
RadioReference accepts frequency and radio-system data from the public, but there is no single "upload" button. The correct route depends on whether you are adding a new frequency, correcting an existing entry, or submitting a whole trunked system.
How submissions generally work
- Register a free account. The site's own navigation separates a free account from Premium, so contributing does not require a paid subscription.
- Use the database submission path. RadioReference's database pages include a "Submit Info" entry point; submissions are reviewed by volunteer administrators before appearing publicly, which is why the site credits an admin team for daily updates.
- Match the submission type to your data. A conventional frequency, a talkgroup, and a full trunked system require different levels of detail (site, control channels, talkgroup IDs, alpha tags).
- Expect moderation, not instant publishing. The database is described as contributor-submitted and volunteer-maintained, so accuracy checks and reclassification are normal.
What to gather before you submit
| Data type | What reviewers typically need |
|---|---|
| Conventional frequency | Exact frequency, mode (FM, NFM, P25, DMR), agency or business name, location |
| Trunked system | System type, sites, control channels, talkgroups with IDs and descriptions |
| Correction | The existing entry, what is wrong, and a source or observation supporting the change |
| Amateur data | Repeater callsign, frequency, offset, tone, coverage area |
Practical next step
Log in, open the relevant state or county database page, and use "Submit Info" rather than posting in the forums — forum posts are discussion, not database entries. If you are unsure whether your data is accurate enough, submit it with a note about how you received it (direct monitoring, license record, agency confirmation); reviewers can often place partial data correctly.
For background on how a system is structured before you submit, the wiki is the better starting point than the forums. RadioReference's own network also points to Broadcastify for live audio and RadioReference.com for the database itself.
User reviews (0)