gai-giacomo.com

Gai Giacomo is an Italian automatic precision turning manufacturer that lists seven served industries: automotive, oleodynamic hydraulics, pneumatic, industrial engineering, medical, aerospace, and building. If you are evaluating it as a parts supplier, the site gives you enough to shortlist it for turned metal components in those sectors, but not enough to confirm capacity, certifications, or lead times — those need to be checked directly before committing.

Industries Gai Giacomo says it serves

The homepage names these branches:

• Automotive
• Oleodynamic hydraulics
• Pneumatic
• Industrial engineering
• Medical
• Aerospace
• Building industry

This is a broad spread. For a buyer, the practical reading is that the company positions itself as a general precision-turning partner rather than a single-sector specialist. That matters if your part needs deep, sector-specific process knowledge — for example, medical or aerospace work usually comes with documentation and traceability expectations that a general machining supplier may or may not carry.

What the company actually does

The site describes four capability areas:

So the offer runs from bar turning through secondary operations to surface treatment. If your component needs turning plus finishing under one supplier, that combination is the relevant selling point. If you only need turning and plan to manage finishing elsewhere, the treatment capability is neutral rather than an advantage.

Scale indicators you can use

The homepage publishes these figures:

• 4,800 managed products
• 150 new products in 2019
• 1,800,000 kg of processed raw material
• 121,655 kWh of self-generated electricity

Use these as rough signals, not as proof of fit. "Managed products" suggests a large active part portfolio, which points to experience with varied geometries and volumes. The raw material tonnage indicates meaningful throughput. The self-generated electricity figure speaks to energy setup, not to your order. None of these numbers tell you whether the company can hold your tolerance, meet your volume, or hit your delivery window.

What buyers should verify before choosing

The site's stated strengths are flexibility, company stability, and customer care. Those are self-descriptions, so treat them as claims to test rather than facts to rely on.

Check these points directly with the supplier:

• Sector-specific experience. Ask for examples of parts made for your industry, especially if you are in medical or aerospace, where qualification requirements are stricter.
• Capacity match. Confirm the machine range covers your part diameter, length, and tolerance — sliding headstock and multi-spindle machines suit different part families.
• Volume fit. Ask what batch sizes they run economically, and whether your annual volume sits inside that range.
• Quality and certification. The homepage does not list quality certifications or standards. Request the specific certificates your sector requires.
• Treatment sourcing. Confirm whether thermal and galvanic treatments are done in-house or through partners, since that affects lead time and traceability.
• Current activity. The news items reference trade fairs in Turin, medical technology, Automadrid, and the Paris Air Show, which indicate active aerospace and medical interest. Verify current participation and recent project references rather than relying on dated announcements.

Who this supplier likely suits

Gai Giacomo is a reasonable candidate to approach if you need CNC turned metal components in moderate to large volumes and want turning, secondary machining, and surface treatment handled together. It is a weaker fit if you need a supplier with published, sector-specific certifications you can verify from public materials alone, or if your volumes are very small.

The deciding step is a direct enquiry: send your part drawings, material, tolerance, volume, and required certifications, and ask for a capability and quality confirmation in writing.

Gai Giacomo is a contract manufacturer focused on automatic precision turning, with additional in-house secondary machining and surface treatment. Its published capabilities cover CNC-controlled single- and twin-spindle bar lathes (fixed and sliding headstock), six- and eight-spindle multi-spindle automatic bar lathes, secondary operations such as transfer, rolling, milling, drilling and camera-equipped picking, plus thermal and galvanic surface treatments to customer specification. If your part is a turned component that also needs finishing or treatment, this combination means fewer separate suppliers to coordinate.

Automatic precision turning

The core of the offer is numerical-control turning on automatic bar lathes:

• CNC-controlled single- and twin-spindle machines
• Fixed headstock and sliding headstock configurations

Fixed and sliding headstock machines suit different part profiles — sliding headstock is typically chosen for long, slender parts where support close to the cut matters, while fixed headstock suits shorter, larger-diameter work. Because both single- and twin-spindle options are listed, the shop can address parts that benefit from completing both sides in one cycle rather than a second operation.

Multi-spindle machines

For higher-volume work, the site lists multi-spindle automatic bar lathes:

Six- and eight-spindle machines are a volume play: more spindles means more operations performed simultaneously per cycle, which is relevant when a part has several features and annual quantities justify the setup. The mix of mechanical and CNC control gives a choice between proven cam-style efficiency and CNC flexibility.

Secondary machining and finishing

Parts can be brought to final form and precision in-house through:

• Transfer operations
• Rolling
• Milling
• Drilling
• Camera-equipped picking machines

The camera-equipped picking step is worth noting if your part needs orientation, inspection or selective handling after turning — it points to automated sorting or verification rather than manual bench work.

Surface treatments

Thermal and galvanic surface treatments are carried out according to customer specifications. That phrasing matters: treatment type and specification are set by the customer's drawing or requirement, not chosen from a fixed catalogue on the site. If your part calls out a specific heat treatment or plating spec, confirm it against their process before quoting.

Sectors served

The listed branches are: automotive, oleodynamic/hydraulics, pneumatic, industrial engineering, medical, aerospace, and building industry. Medical and aerospace in particular usually imply tighter tolerances and traceability expectations, so it is reasonable to ask what quality documentation accompanies those jobs.

Scale signals

Published figures give a sense of capacity:

• 4,800 managed products
• 150 new products in 2019
• 1,800,000 kg of processed raw material
• 121,655 kWh of self-generated electricity

These are volume and activity indicators, not a statement of available machine hours or lead times.

How to decide whether to approach them

Use these conditions to judge fit:

• Good fit: turned parts from bar stock, medium to high volume, needing multi-spindle throughput, secondary milling/drilling/rolling, or an outsourced thermal/galvanic treatment.
• Check first: parts requiring a specific treatment standard, tight aerospace or medical documentation, or materials and diameters outside their bar lathe range — none of these are specified on the site.
• Not indicated: pricing, minimum order quantities, lead times and login or account requirements are not stated in the available material, so treat them as open questions rather than assumptions.

The practical next step is to send a drawing with material, tolerance, quantity and any treatment specification, and ask directly which machine type they would assign and what finishing steps are included.

Gai Giacomo is a manufacturing company specialising in automatic precision turning. Based on its website, it operates CNC-controlled single and twin spindle bar lathes (both fixed headstock and sliding headstock types), multi-spindle automatic bar lathes, secondary machining and finishing equipment, and offers thermal and galvanic surface treatments. It serves industries including automotive, hydraulics, pneumatics, industrial engineering, medical, aerospace, and building.

Core manufacturing capabilities

The company's production is built around several machining categories:

• Automatic precision turning (numerical control) — CNC-controlled, single and twin spindle, fixed headstock and sliding headstock automatic bar lathes.
• Multi-spindle machines — multi-spindle automatic bar lathes with six and eight mechanical spindles, plus CNC control.
• Secondary machining and finishing — transfer, rolling, milling, drilling, and camera-equipped picking machines used to bring manufactured parts to their final form and precision.
• Treatments — thermal and galvanic surface treatments carried out according to customer specifications.

Industries served

The website lists the following branches it works with:

Scale and activity indicators

The homepage provides several figures that give a sense of the company's operational scale:

• 4,800 managed products
• 150 new products in 2019
• 1,800,000 kg of processed raw material
• 121,655 kWh of self-generated electricity

Stated priorities

Under "Why choose us?", the company highlights flexibility, company stability, and customer care. Its positioning statement — "We can turn it" — emphasises state-of-the-art technologies, value-generating ideas, and the will to satisfy customer requirements.

Trade fair presence

The site's news section shows participation in sector events, including:

• Innovative Aerospace Event, 2–4 December, Turin
• Trade fair for medical technology & healthcare, 17–20 November
• Automadrid (Spain automotive), 21–22 October
• International Paris Air Show, 16–22 June, Paris

These appearances align with the aerospace, medical, and automotive sectors listed among its branches.

What this means if you are evaluating the company

If you need a turning supplier, Gai Giacomo presents itself as capable of handling complex, high-volume precision parts — from bar stock through multi-spindle machining to finishing and surface treatment — across demanding sectors such as medical and aerospace. The listed equipment types (sliding headstock, twin spindle, multi-spindle) suggest suitability for both small-diameter long parts and larger batch production. For specific tolerances, materials, or certification requirements, you would need to contact the company directly, as the homepage does not provide those details.

Gai Giacomo publishes its trade fair and event appearances in the Latest News section of its website, gai-giacomo.com. That section is the starting point for anyone who wants to know where the company will be exhibiting or which industries it is currently targeting. The entries visible on the site are event announcements rather than dated press releases, so treat them as a guide to the company's sector focus and check the site directly for current dates and years.

What the Latest News section lists

The homepage news block names four upcoming appearances:

Each entry is a short announcement — for example, "We will participate in the INNOVATIVE AEROSPACE EVENT, 2 – 4 DECEMBER, TURIN" — with no booth number, hall, or registration link shown in the page content.

Why these appearances matter to a buyer

The event list doubles as a signal of where Gai Giacomo sees demand. The four announcements map onto aerospace and defense, medical technology and healthcare, automotive, and aerospace again. That lines up with the branches the site lists separately: Automotive, Oleodinamic Hydraulics, Pneumatic, Industrial engineering, Medical, Aerospace, and Building Industry.

If your sector appears in both lists, a trade fair is a practical moment to make contact — you can see the parts the company produces and discuss a requirement in person rather than starting cold.

How to use the news section

1. Open gai-giacomo.com and go to the Latest News block on the homepage.
2. Read each announcement for the event name, city, and date range.
3. Cross-check the date against the official event website, since the news entries do not state a year.
4. If you plan to attend, contact Gai Giacomo in advance through the site to arrange a meeting — the announcements do not include stand details.

Points to watch

• No years are given in the news entries, so the dates cannot be assumed to be current. Confirm against the organiser's site or the company's latest update.
• No booth or hall information is published in the news text, so you cannot plan a specific visit from the homepage alone.
• The news block shows only the most recent items; earlier appearances may not be visible.
• The site does not state pricing, minimum order quantities, or quotation terms in the material reviewed here, so commercial questions need to go through direct contact.

For context on what the company actually does, its core work is automatic precision turning: CNC-controlled single and twin spindle lathes, fixed and sliding headstock bar lathes, and six- and eight-spindle multi-spindle machines, followed by secondary machining, finishing, and thermal or galvanic surface treatments. The site also cites 4,800 managed products, 150 new products in 2019, 1,800,000 kg of processed raw material, and 1,216,55 kWh of self-generated electricity — figures that give a sense of scale when you are deciding whether to approach them at an event.