Website review
This review may include AI-generated content and is not individually verified. Domain, certificate and other facts come from the observed data on this page.
What is Straughan Environmental, Inc.?
Straughan Environmental, Inc. is an environmental consulting and engineering firm that describes itself as “solving the major environmental challenges of our time,” with sustainability as a core motivation. Its work spans planning, design, permitting and construction-phase support, delivered by what it calls a team of engineers, planners and scientists.
Straughan Environmental, Inc.
What the firm actually does
Its services cluster into three broad areas:
- Management and consulting — environmental program management, construction management and inspection, GIS, and planning with public involvement.
- Environmental design and engineering — ecosystem restoration, water resources and civil engineering, coastal and resiliency work, and sustainable infrastructure.
- Assessments and permitting — NEPA and alternative analysis, natural resources and permitting, cultural resources, and noise and air quality analysis.
Who it works for
Straughan serves both government and commercial clients, with government broken out into federal, county and local agencies. Its stated markets are federal government, county and local government, transportation, water/wastewater, and energy. The featured projects on its site follow that pattern — for example, design review, environmental permitting, stream restoration mitigation design and public outreach for Maryland toll lanes; stormwater pollution prevention and environmental services for a Virginia bridge-tunnel expansion; stream mapping for a District of Columbia agency; stream restoration and pond decommissioning for a Maryland county; and TMDL program management for a state highway administration.
How to judge whether it fits your project
The useful question is not “is this a good firm” but “does my project look like their project list.” If you are a transportation or water agency, a local government office, or a federal program needing permitting, NEPA documentation, restoration design or program-level environmental management, the fit is plausible. If you need something outside those lanes — say, industrial compliance auditing or remediation contracting — the site gives no evidence of it.
A practical next step: pick the two or three featured projects closest to your own and ask Straughan directly who the project manager was, what the scope boundaries were, and how they handled public involvement or permitting timelines. Those answers tell you more than a capabilities list. You can also compare against other environmental consultancies serving similar public clients, such as Tetra Tech or ERM, to see how scope and market focus differ before you shortlist.
What types of environmental projects does Straughan Environmental specialize in?
Straughan Environmental works across a broad range of environmental planning, design and construction-support work, with particular depth in transportation and water-related infrastructure. Based on the firm's own service listings, its specialties cluster into four areas:
- Planning and permitting: Alternative analysis and NEPA, natural resources permitting, cultural resources, and noise and air quality analysis.
- Design and engineering: Ecosystem restoration, water resources and civil engineering, coastal and resiliency work, and sustainable infrastructure.
- Management and consulting: Environmental program management, construction management and inspection, and GIS.
- Public involvement: Planning support and outreach alongside technical work.
Its stated markets are federal government, county and local government, transportation, water/wastewater, and energy — so it serves both public agencies and commercial clients rather than a single sector.
What the featured projects show
The project examples on the page make the specialization concrete: design review, environmental permitting, stream restoration mitigation design and public outreach for Maryland toll-lane work; stormwater pollution prevention and environmental services for a Virginia bridge-tunnel expansion; stream mapping for a district energy and environment office; stream restoration and pond decommissioning for a county sustainability office; sanitation facilities construction support for the Indian Health Service; and TMDL program management for a state highway administration.
The pattern is regulatory and infrastructure-driven environmental work: permitting, stormwater, restoration, and program management tied to transportation and water projects.
Who this fits
If you are a transportation agency, local government, water utility or federal program office that needs permitting, NEPA documentation, stormwater compliance or restoration design bundled with program management, this profile is aimed at you. A commercial developer facing similar permitting and restoration requirements could also use these services, though the project list leans heavily toward public-sector clients.
Next step
Match your need to a service line before making contact. If your project is primarily a permitting or NEPA question, start there; if it involves stream or wetland restoration, look at ecosystem restoration and water resources. For a fuller picture of scale and typical project types, browse the featured projects on Straughan Environmental. Comparable firms with strong environmental permitting practices include Tetra Tech and ERM.
How does Straughan Environmental approach environmental permitting and compliance for transportation projects?
Straughan Environmental treats permitting and compliance as an integrated part of transportation project delivery rather than a final approval step. Its page describes teams of engineers, planners, and scientists working across environmental design, assessments and permitting, natural resources and permitting, and program management. For a transportation client, that means the same firm can help scope studies, prepare permit applications, support public involvement, and manage commitments through construction.
What the page shows in practice
The featured transportation work is the clearest evidence of the approach:
- Maryland Transportation Authority (I-95 Express Toll Lanes): design review, environmental permitting, stream restoration mitigation design, and public outreach.
- Virginia Department of Transportation (I-64 Hampton Roads Bridge-Tunnel Expansion): stormwater pollution prevention plan and environmental services.
- Maryland State Highway Administration: TMDL program management.
These examples suggest a compliance model built around three things: early permitting analysis, mitigation design where impacts cannot be avoided, and ongoing program management for water-quality and stormwater obligations.
How the service lines fit together
| Transportation need | Related Straughan service |
|---|---|
| Route or project alternatives | Alternative Analysis + NEPA |
| Wetlands, streams, species | Natural Resources + Permitting |
| Stormwater and TMDL obligations | Water Resources + Civil Engineering; Environmental Program Management |
| Historic or archaeological resources | Cultural Resources |
| Air and noise impacts | Noise + Air Quality Analysis |
| Public and agency coordination | Planning + Public Involvement |
| Construction-phase commitments | Construction Management + Inspection |
The trade-off is typical of an integrated environmental consultancy: you get coordination across disciplines and fewer handoffs between firms, but you should still confirm the specific in-house technical depth and licensing needed for your project, especially for complex water or structural design.
A useful next step
If you are scoping a transportation project, ask Straughan for examples where it carried a permit from alternatives analysis through construction compliance, and how it tracks mitigation and stormwater commitments after approval. That will show whether its program management matches your agency's long-term compliance needs. You can review its markets and services at Straughan Environmental, Inc..
What services does Straughan Environmental offer for water resources and ecosystem restoration?
Straughan Environmental treats water and ecosystem work as both a design-and-engineering service and a permitting/analysis service. From its listed capabilities, the relevant offerings are:
- Ecosystem Restoration — restoring degraded streams, ponds, and related habitats.
- Water Resources + Civil Engineering — engineering tied to stormwater, streams, and water infrastructure.
- Coastal + Resiliency — addressing shoreline and climate-resilience concerns.
- Sustainable Infrastructure — incorporating sustainability into built projects.
- Assessments & Permitting and Natural Resources + Permitting — environmental review and approvals for water-related work.
- GIS — mapping and spatial analysis, useful for watersheds, streams, and project siting.
A featured example is stream restoration and mitigation design for the I-95 Express Toll Lanes with the Maryland Transportation Authority; another is a stream restoration and pond decommissioning project for Frederick County. This tells you the firm's water work is often tied to transportation and local-government projects, not just standalone habitat projects.
Next step: if you have a specific site, ask whether the scope would be led by restoration design, civil/water engineering, or the permitting team — the right entry point depends on whether your main problem is a failing stream, a stormwater requirement, or an approval hurdle. For broader context on federal water programs, see U.S. Environmental Protection Agency.
How can I partner with Straughan Environmental on a government or commercial project?
Start by matching your project to one of Straughan's two client tracks: government (federal, county and local) or commercial. The site presents both as core markets, so the practical first step is to identify which track your work sits in and which service line it touches.
What they actually do
The company describes itself as engineers, planners and scientists working on environmental challenges, with sustainability as the stated motivation. Its listed services cluster into four broad areas:
- Management and consulting – environmental program management, construction management and inspection, GIS, planning and public involvement.
- Design and engineering – ecosystem restoration, water resources and civil engineering, coastal and resiliency work, sustainable infrastructure.
- Assessments and permitting – NEPA and alternative analysis, natural resources permitting, cultural resources, noise and air quality analysis.
- Market-facing work – transportation, water and wastewater, energy, and federal, county and local government programs.
How partnering tends to work in practice
Their featured projects show the shape of typical engagements: design review, environmental permitting, stream restoration mitigation design and public outreach for a toll-lane project; stormwater pollution prevention and environmental services for a bridge-tunnel expansion; stream mapping for a district environment agency; stream restoration and pond decommissioning for a county sustainability office; and program management support for a state highway administration's water-quality program.
That pattern suggests they are usually brought in as a specialist subconsultant or prime on environmental scope within a larger infrastructure or facilities program, rather than as a general contractor. If your project has a permitting hurdle, a restoration or water-resources component, or a public-involvement requirement, that is the natural entry point.
A concrete next step
Before reaching out, prepare a one-page brief: client type (federal, county/local, or commercial), project phase (planning, design, construction, or program management), the specific service line you need, and any regulatory driver such as NEPA or a stormwater permit. Then use the "Looking for a specific solution?" or "Working With Us" path on Straughan Environmental to route your inquiry, and reference one of their featured project types as the closest analogue to your need.
Decision criterion
Choose Straughan when your project's risk sits in environmental compliance, permitting, restoration design or program oversight, and you need a firm comfortable working alongside transportation, water or energy clients. If your need is purely structural, architectural or general construction, look elsewhere — their stated capabilities are environmental and civil, not general building.
What career opportunities are available at Straughan Environmental?
Straughan Environmental hires across three broad skill clusters: environmental science and permitting, engineering and design, and program/construction management. The careers page frames these roles around a culture of collaboration and a mission of advancing sustainable, resilient neighborhoods, serving both government and commercial clients.
Likely role areas, based on the services listed
- Natural resources and permitting: NEPA analysis, alternative analysis, natural resources permitting, cultural resources, noise and air quality analysis
- Environmental design and engineering: water resources and civil engineering, ecosystem restoration, coastal and resiliency work, sustainable infrastructure
- Management and consulting: environmental program management, construction management and inspection, GIS, planning and public involvement
- Assessment work: environmental assessments and permitting support
Who fits well Early-career scientists and engineers can enter through field and analysis work tied to permitting and restoration projects. Mid-career planners, GIS specialists, and civil or environmental engineers tend to move into project and program management. Senior candidates with NEPA or transportation-sector experience are often positioned for client-facing and program leadership roles.
A practical next step Check the current openings directly at Straughan Environmental and filter by the market you want to work in — federal, county and local government, transportation, water/wastewater, or energy. If you are deciding between offers at similar firms, compare the mix of permitting versus design versus construction-phase work, since that mix shapes your day-to-day far more than the job title.
Decision criterion If you want variety across the project lifecycle, a firm doing both consulting and construction management offers broader exposure. If you want deep technical specialization, target the natural resources or water resources teams specifically.
User reviews (0)