Website profiles · Technology insights · Alternatives

ergogen.xyz

Ergogen Web GUI — design ergonomic keyboard layouts and generate PCB, DXF, and 3D model files, fully offline.

No paid content found
Visit website
Profile views 13 Outbound visits 4 Normal
Ergogen Full homepage screenshot

At a glance

Category
Design & Creativity
Language
English
Paid-content signal
No paid content foundObserved
Registered
2021
Hosting
FastlyInferred
HTTPS certificate trusted
PassedObserved
Last updated

Website review

This review may include AI-generated content and is not individually verified. Domain, certificate and other facts come from the observed data on this page.

What is Ergogen?

Ergogen is a browser-based design tool for building custom ergonomic keyboards. You describe a layout in a configuration file, and it turns that description into manufacturing files — PCB data, DXF outlines, and 3D models. It runs fully offline in the browser, so your work stays on your machine, and it is aimed at people who want a repeatable, code-driven workflow rather than clicking shapes in a CAD program.

What you actually do with it

  • Write a layout definition: key positions, rows, columns, and thumb clusters.
  • Let the tool generate the geometry and routing outputs from that definition.
  • Export the results for PCB fabrication, case cutting, or 3D printing.
  • Iterate by editing text, not by redrawing — a small change updates every output.

Who it suits

  • Keyboard hobbyists comfortable editing config files who want one source of truth for a board.
  • Small group buys or one-off builders who need consistent files across revisions.
  • Anyone designing split or columnar layouts where hand-drawing gets tedious.

It is a weaker fit if you want a visual drag-and-drop editor with no text configuration, or if you need a full mechanical CAD suite for complex enclosures.

H3. Practical next step Start with the simplest possible layout — a single row of keys — and confirm you can generate and open each output type before adding thumb clusters or a split. That separates "my config is wrong" from "my exporter settings are wrong." If you want to compare approaches, KiCad handles schematic and PCB editing directly, while QMK covers the firmware side once the hardware exists.

H3. Trade-offs to expect A text-driven generator is fast to revise and easy to version-control, but it assumes you can think in coordinates and parameters. The payoff is that a well-written definition can regenerate a whole keyboard family; the cost is a learning curve before the first usable board.

How do I design an ergonomic keyboard layout with Ergogen?

Ergogen is a browser-based tool for turning a keyboard-layout description into manufacturing files. You write the layout as structured configuration text, and it derives the key positions, outlines, and outputs from that description rather than asking you to draw everything by hand. The page at Ergogen is a web GUI, so the work happens in your browser, and the description notes it runs fully offline and can generate PCB, DXF, and 3D model files.

The basic workflow

  1. Describe the layout logically. Instead of placing every key individually, you define units and let Ergogen handle positioning. Keys are typically arranged in rows and columns, with rotations and offsets applied per row or per cluster. This is the core idea: you declare intent ("this row is angled 10 degrees, this column is staggered") and the tool computes coordinates.
  2. Define the physical shape. The outline and mounting features are derived from the key positions plus parameters you supply, so the plate and case follow the layout rather than the reverse.
  3. Generate outputs. From the same source description you get the PCB, the DXF (for laser cutting or CNC), and the 3D model. Because all three come from one description, they stay consistent when you change the layout.
  4. Iterate in the preview. Adjust angles, offsets, and spacing, and check the result visually before exporting.

What to decide before you start

  • Split or unibody. A split design needs two halves and a connection method; a unibody design is simpler to define but less adjustable in use.
  • Column stagger and splay. Stagger is the vertical offset between adjacent columns; splay is the fan-like rotation of columns. These are the two parameters that most affect comfort.
  • Thumb cluster. Most ergonomic designs add keys under the thumbs. Decide how many and at what angle before finalizing the outline, since they change the case shape.
  • Key count and matrix. Fewer keys reduce reach but demand layers. The matrix wiring follows from the key positions you define.

A practical example

Suppose you want a 36-key split board with three rows per half, a moderate column stagger, and a three-key thumb cluster. You would define the rows and columns with per-column vertical offsets, add a rotated thumb group, then let Ergogen produce the plate outline and PCB. If the thumb cluster feels cramped, you change its offset in the description and regenerate everything at once — no redrawing the case by hand.

Where to go next

If you want to compare approaches or use a ready-made starting point, the keyboard community maintains open-source layouts and generators. GitHub hosts many Ergogen configuration files you can read as examples, and Keyboard Builders collects design resources and community discussion. Reading a working configuration is usually faster than starting from a blank description, because you can see how stagger, splay, and thumb clusters are expressed.

The main trade-off: Ergogen rewards you for thinking in parameters, but it expects you to be comfortable editing structured text. If you would rather drag keys around a canvas, a visual layout editor will feel more natural; if you want the PCB, plate, and case to stay in sync automatically, the description-driven approach is the stronger fit.

What file formats can Ergogen generate for keyboard manufacturing?

Ergogen is a keyboard layout tool that generates manufacturing-ready output files rather than finished products. Based on its own description, it produces three main formats:

  • PCB files — for fabricating a printed circuit board from your layout.
  • DXF files — 2D vector drawings, typically used for CNC-cut cases, plates or switch cutouts.
  • 3D model files — for visualising or 3D-printing a case or enclosure.

A practical way to think about the split: PCB output drives the electronics, DXF drives flat machined parts like plates and case panels, and the 3D model covers printed or rendered enclosures.

Next step: decide which stage of your build you're at. If you're ordering a board from a fab house, you want the PCB output; if you're cutting a switch plate or case on a CNC or laser cutter, the DXF is the relevant one; if you're printing a case, go for the 3D model. Check the exact export options inside the tool, since the description doesn't specify file extensions or which 3D format is used.

Note that the page itself only renders with JavaScript enabled, so open Ergogen in a normal browser rather than a text-only viewer.

Can I use Ergogen without an internet connection?

Yes. Ergogen is designed to run fully offline once the app itself is loaded. The web GUI at Ergogen is a client-side app, so the layout definitions you write are processed in your browser rather than on a remote server. Your keyboard geometry, PCB outlines, DXF exports and 3D model files are generated locally.

What "offline" means in practice

  • After the app has loaded in your browser, you can disconnect and keep working.
  • Your design files and generated outputs stay on your machine.
  • Nothing about the core workflow depends on a live connection.

The one caveat

The page requires JavaScript to run, and the app has to be fetched at least once. If you want to work offline from a cold start — on a plane, in a workshop with no Wi-Fi, or on an air-gapped machine — load the page while you still have a connection and keep the tab open, or save the app locally so your browser can open it without a network request.

A practical next step

If offline use matters to you, test it deliberately: open Ergogen, load or write a small layout, then switch off Wi-Fi and confirm that editing and exporting still work. Do this before you rely on it during a trip or a build session. For a permanent offline setup, keep a local copy of the app rather than depending on the hosted page being reachable.

How does Ergogen's web GUI differ from using its command-line interface?

The Ergogen web GUI and its command-line interface (CLI) are two front ends to the same layout engine. The GUI runs in your browser and, per its own description, works fully offline; the CLI runs in a terminal and is driven by a YAML config file. Both let you define keyboard geometry and export outputs such as PCB, DXF and 3D model files — the difference is mostly about workflow, not capability.

H3 Where the two approaches diverge

Aspect Web GUI CLI
Input method Interactive editing in the browser YAML files edited in any text editor
Feedback loop Immediate visual preview as you tweak parameters Re-run the command to regenerate outputs
Setup Open the page; no install Node.js/npm-style install and local toolchain
Reproducibility Depends on saving your config Config lives in version control naturally
Automation Manual, one design at a time Scriptable, batchable, CI-friendly
Offline use Stated to work offline once loaded Always local

H3 Who each suits

  • First-time ergonomic keyboard designers benefit from the GUI: you can see the effect of changing a column stagger or thumb-cluster offset without understanding the full config schema first.
  • Repeat builders and small-batch makers often prefer the CLI because the config file is the project. It diffs cleanly, can be shared, and can regenerate every output on demand.
  • Teams or anyone iterating across many variants gain from the CLI's scriptability; the GUI is better for exploring one design interactively.

H3 A practical next step

Start in the GUI to get a feel for how parameters map to geometry, then move the resulting config into a text file and drive it with the CLI once your design stabilises. That gives you the GUI's fast feedback early and the CLI's reproducibility later, without redoing the layout from scratch. If you only ever build one board, staying in the GUI is perfectly reasonable.

For background on the project and its config format, see Ergogen.

What are the key parameters for configuring key spacing and column stagger in Ergogen?

Ergogen configures key spacing and column stagger through its YAML layout definition, not through interactive sliders. You declare points in a coordinate grid, then let Ergogen derive the switch footprints, PCB, DXF and 3D outputs from those coordinates.

Key spacing

  • Spacing is set by the increments you use between point coordinates — typically a single unit value applied consistently across rows and columns.
  • Horizontal spacing between keys in a row and vertical spacing between rows are controlled separately, so you can build a tighter matrix in one axis than the other.
  • Changing the base unit rescales the whole board; changing individual offsets shifts single keys without touching the rest.
  • Because spacing feeds directly into the generated footprints and plate cutouts, it should be settled before you export manufacturing files.

Column stagger

  • Stagger is expressed as a per-column vertical offset, so each column's keys sit higher or lower than their neighbours.
  • The usual approach is a small array of offsets, one value per column, applied as you generate the column's points.
  • Positive and negative offsets let you raise the index and middle columns and drop the pinky and ring columns, which is the common ergonomic pattern.
  • Stagger can also vary per row within a column if you want a curved or splayed profile rather than a simple stepped one.

Practical starting point

If you are new to this, define a flat grid first, confirm the spacing looks right in the 3D preview, and only then layer in column offsets one column at a time. Changing stagger after you have tuned spacing usually means re-checking the plate and case geometry, so sequence matters.

For the exact parameter names and syntax, work from the project's own documentation at Ergogen rather than guessing at field names.

Related questions

More questions →
What is ergogen.xyz?
Ergogen Web GUI — design ergonomic keyboard layouts and generate PCB, DXF, and 3D model files, fully offline.
Does ergogen.xyz offer paid content?
Unknown.
What languages does ergogen.xyz support?
Primary language: English.
How can I visit ergogen.xyz?
Use the Visit website link to open the website in a new tab.
What are some alternatives to ergogen.xyz?
Related websites include zzz.dog, zurb.com, zeplin.io, zenelements.com, zenaswimwear.ca, zehfernandes.com. Compare their features and pricing for your needs.

Website Overview

Several search or sharing settings need attention. Together they may make snippets, preview images or preferred URLs less consistent across platforms. An active inbound-mail setup with incomplete authentication may leave the domain more open to impersonation. Provider hosting alone does not close that gap.

Domain and Registration

The domain uses .xyz. Assess the website's identity and content rather than relying on the extension alone. Transfer-protection status is present, helping reduce the risk of unauthorized domain transfers. The domain has about 5 years of registration history; its current configuration provides more context than age alone. The registrar is NameCheap, Inc., a widely used domain service provider.

DNS and Email

The observed email authentication setup is incomplete: DMARC is missing. The lowest TTL is 60 seconds, supporting rapid record changes at the cost of more frequent lookups. Nameservers are provided by Namecheap, indicating managed DNS hosting. MX records point to the registrar-servers.com email service. No CNAME was found; the observed records resolve directly to addresses.

TLS and Certificates

The certificate uses an RSA 2048-bit public key, offering broad client compatibility. The server supplied a complete certificate chain. No organization name is present in the certificate; the available fields are consistent with domain validation. The certificate was issued by Let's Encrypt, commonly associated with automated certificate services. The certificate's total validity is about 89 days, consistent with a short renewal cycle.

HTTP and Browser Security

The response lacks these common security headers: CSP, X-Content-Type-Options, Referrer-Policy, Permissions-Policy, clickjacking protection. CORS permits any origin to read this response. This is common for public resources; sensitive responses need narrower handling. No X-Powered-By header was found, reducing one common source of backend fingerprinting information. The x-cache, x-served-by, via response header indicates a CDN or caching proxy in the delivery path. No obvious internal addresses or debug information were found in the headers.

Technology Stack Analysis

The public page identifies Fastly without precise versions, leaving fewer clues for version-specific scanning.

Search and Social Sharing

No homepage canonical URL was detected. If duplicate URLs exist, consolidation may be less explicit. No Open Graph metadata was detected, so social previews may depend on platform inference. The title has 7 characters, within a common display range. A meta description is present, with 109 characters. The observed directives allow indexing and link following.

Hosting and Email

DNSNamecheap
HostingFastly
Emailregistrar-servers.com
Approximate IP geolocation (inferred; a CDN or proxy may differ from the origin server) United States flagUnited States Inferred 185.199.108.153

Registration details

RDAP / WHOIS

RegistrarNameCheap, Inc.
Registered2021-11-14
Expires2028-11-14
Domain statusclient transfer prohibited
Nameserversdns1.registrar-servers.com、dns2.registrar-servers.com
DNSSECunsigned

DNS records

DNS

TypeNameValueTTLPriority
Aergogen.xyz185.199.108.15360—
Aergogen.xyz185.199.109.15360—
Aergogen.xyz185.199.110.15360—
Aergogen.xyz185.199.111.15360—
AAAAergogen.xyz2606:50c0:8000::15360—
AAAAergogen.xyz2606:50c0:8001::15360—
AAAAergogen.xyz2606:50c0:8002::15360—
AAAAergogen.xyz2606:50c0:8003::15360—
MXergogen.xyzeforward1.registrar-servers.com180010
MXergogen.xyzeforward2.registrar-servers.com180010
MXergogen.xyzeforward3.registrar-servers.com180010
MXergogen.xyzeforward4.registrar-servers.com180015
MXergogen.xyzeforward5.registrar-servers.com180020
NSergogen.xyzdns1.registrar-servers.com1800—
NSergogen.xyzdns2.registrar-servers.com1800—
TXTergogen.xyzv=spf1 include:spf.efwd.registrar-servers.com ~all1800—

TLS and certificates

TLS / SSL

AssessmentNormal configuration
Supported protocolsTLSv1.2、TLSv1.3
Negotiated protocolTLSv1.3
Certificate subjectergogen.xyz
IssuerLet's Encrypt
Valid until2026-11-08T17:39 · Remaining when checked: 37 days
Verification detailsCertificate trust: Passed · Hostname match: Passed

HTTP response headers

HTTP

HeaderValue
content-typetext/html; charset=utf-8
cache-controlmax-age=600
serverGitHub.com
strict-transport-securitymax-age=31556952
access-control-allow-origin*

Identified technologies

Fastly

Pages, Search and Sharing

Meta descriptionErgogen Web GUI — design ergonomic keyboard layouts and generate PCB, DXF, and 3D model files, fully offline.
Canonical URLNot detected
LanguageEnglish (default)
Twitter CardNot detected

Unknown

All bots 0 allowed · 0 disallowed

No sitemaps found

User reviews (0)

  • No reviews yet.